Tru-Cool Max Trans Cooler 4739 & 47391 Install Kit - Brackets & Fittings & Hardware
Feb 23, 2021 | 04:08 PM
#536
Staging Lane
Joined: Sep 2017
Posts: 59
Likes: 1
Currently, these brackets allow for a Tru-Cool Max (Part # 4739 or 47391) to be installed on 99-06 (07 Classic) Silverado/Sierra 1500/2500/3500 Trucks with a 4L60E, 4L65E, or 4L80E transmission. Will not fit trucks with Allison trans. Will also fit the NBS SUVs such as Tahoe, Yukon, Avalanche, and Escalade. Also updated to now fit 2007-2014, see notes below!
If you already have a factory trans cooler, this kit includes everything needed to install the Tru-Cool Max cooler. There are two brackets, two quick disconnect fittings, a compression fitting, and the necessary hardware needed for install. The only thing you need to supply is a tubing cutter. One trans line needs to be cut and spun 180* to fit the wider stance of the cooler.
If you do not have a factory trans cooler, you will need to mod/replace one trans line, and buy a factory line that goes from the cooler to radiator.
The complete kit is $75 shipped in the USA. If you want just the brackets, and no hardware/fittings, it will be $65 shipped. My paypal address is: paypal@eadperformance.com Just send the $65/$75 depending on the kit you want and include a note that you are purchasing the trans cooler brackets and make sure to include a shipping address.
I'm going to try and setup a quick Paypal checkout to make purchasing these easier. I have quite a few of these kits in stock, and will update the thread if I run out of stock or if there will be any shipping delays. Typically, a kit will ship out within 24 hours, and will be shipped via USPS Priority.
Install Guide: Tru Cool Install Guide
Transfer Case Fluid
I also have ACDelco Auto Trak II Fluid. $18 shipped for two quarts or $26 shipped for three quarts. You can also send payment for this via the same paypal address as above. Just send a note that its for the Auto Trak II.
*Stock Status*
These are currently INSTOCK for immediate shipping.
***FITMENT UPDATE***
Here's how to tell if these will fit your 2007-2014 Silverado, Sierra, Escalade, Yukon, Tahoe, Avalanche, Suburban:
If the bottom bar of the stock trans cooler is BOLTED on, these brackets are a 100% direct fit/bolt on.
If the bottom bar of the stock trans cooler is WELDED on, these brackets will fit one of two ways:
1) Cut/Grind the welds and remove your stock bracket. Use self tapping screws (or another method) and bolt my bottom bracket on
OR
2) If you do not want to cut/modify your stock supprt, Replace the entire support. They can be had for about $60 shipped. You want part #: GM1225262 This includes a bolted on bracket. Here's one on ebay for $60.32 shipped: SUPPORT BRACKET ON EBAY
Here's a picture showing where to look if you're bracket is bolted or welded on, look at the two yellow circles: BOLTED ON BRACKET
.
If you already have a factory trans cooler, this kit includes everything needed to install the Tru-Cool Max cooler. There are two brackets, two quick disconnect fittings, a compression fitting, and the necessary hardware needed for install. The only thing you need to supply is a tubing cutter. One trans line needs to be cut and spun 180* to fit the wider stance of the cooler.
If you do not have a factory trans cooler, you will need to mod/replace one trans line, and buy a factory line that goes from the cooler to radiator.
The complete kit is $75 shipped in the USA. If you want just the brackets, and no hardware/fittings, it will be $65 shipped. My paypal address is: paypal@eadperformance.com Just send the $65/$75 depending on the kit you want and include a note that you are purchasing the trans cooler brackets and make sure to include a shipping address.
I'm going to try and setup a quick Paypal checkout to make purchasing these easier. I have quite a few of these kits in stock, and will update the thread if I run out of stock or if there will be any shipping delays. Typically, a kit will ship out within 24 hours, and will be shipped via USPS Priority.
Install Guide: Tru Cool Install Guide
Transfer Case Fluid
I also have ACDelco Auto Trak II Fluid. $18 shipped for two quarts or $26 shipped for three quarts. You can also send payment for this via the same paypal address as above. Just send a note that its for the Auto Trak II.
*Stock Status*
These are currently INSTOCK for immediate shipping.
***FITMENT UPDATE***
Here's how to tell if these will fit your 2007-2014 Silverado, Sierra, Escalade, Yukon, Tahoe, Avalanche, Suburban:
If the bottom bar of the stock trans cooler is BOLTED on, these brackets are a 100% direct fit/bolt on.
If the bottom bar of the stock trans cooler is WELDED on, these brackets will fit one of two ways:
1) Cut/Grind the welds and remove your stock bracket. Use self tapping screws (or another method) and bolt my bottom bracket on
OR
2) If you do not want to cut/modify your stock supprt, Replace the entire support. They can be had for about $60 shipped. You want part #: GM1225262 This includes a bolted on bracket. Here's one on ebay for $60.32 shipped: SUPPORT BRACKET ON EBAY
Here's a picture showing where to look if you're bracket is bolted or welded on, look at the two yellow circles: BOLTED ON BRACKET
.
Feb 25, 2021 | 04:12 PM
#538
Registered User
Joined: Feb 2021
Posts: 1
Likes: 0
Still making these?
Currently, these brackets allow for a Tru-Cool Max (Part # 4739 or 47391) to be installed on 99-06 (07 Classic) Silverado/Sierra 1500/2500/3500 Trucks with a 4L60E, 4L65E, or 4L80E transmission. Will not fit trucks with Allison trans. Will also fit the NBS SUVs such as Tahoe, Yukon, Avalanche, and Escalade. Also updated to now fit 2007-2014, see notes below!
If you already have a factory trans cooler, this kit includes everything needed to install the Tru-Cool Max cooler. There are two brackets, two quick disconnect fittings, a compression fitting, and the necessary hardware needed for install. The only thing you need to supply is a tubing cutter. One trans line needs to be cut and spun 180* to fit the wider stance of the cooler.
If you do not have a factory trans cooler, you will need to mod/replace one trans line, and buy a factory line that goes from the cooler to radiator.
The complete kit is $75 shipped in the USA. If you want just the brackets, and no hardware/fittings, it will be $65 shipped. My paypal address is: paypal@eadperformance.com Just send the $65/$75 depending on the kit you want and include a note that you are purchasing the trans cooler brackets and make sure to include a shipping address.
I'm going to try and setup a quick Paypal checkout to make purchasing these easier. I have quite a few of these kits in stock, and will update the thread if I run out of stock or if there will be any shipping delays. Typically, a kit will ship out within 24 hours, and will be shipped via USPS Priority.
Install Guide: Tru Cool Install Guide
Transfer Case Fluid
I also have ACDelco Auto Trak II Fluid. $18 shipped for two quarts or $26 shipped for three quarts. You can also send payment for this via the same paypal address as above. Just send a note that its for the Auto Trak II.
*Stock Status*
These are currently INSTOCK for immediate shipping.
***FITMENT UPDATE***
Here's how to tell if these will fit your 2007-2014 Silverado, Sierra, Escalade, Yukon, Tahoe, Avalanche, Suburban:
If the bottom bar of the stock trans cooler is BOLTED on, these brackets are a 100% direct fit/bolt on.
If the bottom bar of the stock trans cooler is WELDED on, these brackets will fit one of two ways:
1) Cut/Grind the welds and remove your stock bracket. Use self tapping screws (or another method) and bolt my bottom bracket on
OR
2) If you do not want to cut/modify your stock supprt, Replace the entire support. They can be had for about $60 shipped. You want part #: GM1225262 This includes a bolted on bracket. Here's one on ebay for $60.32 shipped: SUPPORT BRACKET ON EBAY
Here's a picture showing where to look if you're bracket is bolted or welded on, look at the two yellow circles: BOLTED ON BRACKET
.
If you already have a factory trans cooler, this kit includes everything needed to install the Tru-Cool Max cooler. There are two brackets, two quick disconnect fittings, a compression fitting, and the necessary hardware needed for install. The only thing you need to supply is a tubing cutter. One trans line needs to be cut and spun 180* to fit the wider stance of the cooler.
If you do not have a factory trans cooler, you will need to mod/replace one trans line, and buy a factory line that goes from the cooler to radiator.
The complete kit is $75 shipped in the USA. If you want just the brackets, and no hardware/fittings, it will be $65 shipped. My paypal address is: paypal@eadperformance.com Just send the $65/$75 depending on the kit you want and include a note that you are purchasing the trans cooler brackets and make sure to include a shipping address.
I'm going to try and setup a quick Paypal checkout to make purchasing these easier. I have quite a few of these kits in stock, and will update the thread if I run out of stock or if there will be any shipping delays. Typically, a kit will ship out within 24 hours, and will be shipped via USPS Priority.
Install Guide: Tru Cool Install Guide
Transfer Case Fluid
I also have ACDelco Auto Trak II Fluid. $18 shipped for two quarts or $26 shipped for three quarts. You can also send payment for this via the same paypal address as above. Just send a note that its for the Auto Trak II.
*Stock Status*
These are currently INSTOCK for immediate shipping.
***FITMENT UPDATE***
Here's how to tell if these will fit your 2007-2014 Silverado, Sierra, Escalade, Yukon, Tahoe, Avalanche, Suburban:
If the bottom bar of the stock trans cooler is BOLTED on, these brackets are a 100% direct fit/bolt on.
If the bottom bar of the stock trans cooler is WELDED on, these brackets will fit one of two ways:
1) Cut/Grind the welds and remove your stock bracket. Use self tapping screws (or another method) and bolt my bottom bracket on
OR
2) If you do not want to cut/modify your stock supprt, Replace the entire support. They can be had for about $60 shipped. You want part #: GM1225262 This includes a bolted on bracket. Here's one on ebay for $60.32 shipped: SUPPORT BRACKET ON EBAY
Here's a picture showing where to look if you're bracket is bolted or welded on, look at the two yellow circles: BOLTED ON BRACKET
.
