Tru-Cool Max Trans Cooler 4739 & 47391 Install Kit - Brackets & Fittings & Hardware
#321
Finally installed mine the fittings were too tight for my lines as well had to go buy the dorman ones at advance which fit like stock. Might want to check the fittings to see if there are variances on the id if they work for some and not others.
#324
Just recieved the full kit. Install of cooler is spot on. The fittings are just a tad to small to except the factory lines.
2001 Silverado 4x4 Z71.
Is there a chance you sent the wrong size? If so do you have a part number so I can pick some up?
Thanks, Jere
Update!!! After a nights rest I tried both fittings and one works perfect, the other one still no go.
Any one know the part number for these fittings? Figure It's easier to just go buy another fitting.
2001 Silverado 4x4 Z71.
Is there a chance you sent the wrong size? If so do you have a part number so I can pick some up?
Thanks, Jere
Update!!! After a nights rest I tried both fittings and one works perfect, the other one still no go.
Any one know the part number for these fittings? Figure It's easier to just go buy another fitting.
#325
Just want to verify:
This includes the install kit, no cooler
And will let me use factory lines with the only modification being the compression fitting to rotate the passenger side line. Aside from that, everything pretty much bolts in?
What sort of temp drops have y'all seen? I intend to keep the factory radiator passthrough
This includes the install kit, no cooler
And will let me use factory lines with the only modification being the compression fitting to rotate the passenger side line. Aside from that, everything pretty much bolts in?
What sort of temp drops have y'all seen? I intend to keep the factory radiator passthrough
Only modification to your stock setup is adding the compression fitting to one stock line to rotate it as you mentioned. Everything bolts on otherwise.
I ran 165-170* during the summer with a 408 engine in my truck with a 4L65E and a really loose 3800 stall converter. That was running thru the radiator like the stock setup.
#326
You considered making a set to mount them between the radiator and condenser for us turbo guys? Just an idea for you... can’t mount the cooler with your brackets as intercooler goes there.
#330
Hello, I sent payment on the 22 of Dec but have not heard anything. Could you give me a status?
Thanks!
Richard D December 22, 2018
Edit*** I called and the item was shipped right away and I plan to install this weekend.
Thanks!
Richard D December 22, 2018
Edit*** I called and the item was shipped right away and I plan to install this weekend.
Last edited by latvius; 01-12-2019 at 07:15 AM.