Looking to swap intake and wanted to see what you guys thought.

Vic jr power band is 3500-7500 and I am running 5.7 with a 4200 converter, 4.56 gears and 11:1 compression. .. will run 12:1 when I swap heads.

I am looking to top this with a 1000cfm accufab 4 barrel TB.

I have already gone 7.82 with a 1.63 60" only leaving at 1800.. any more it would have suspension issues which I plan to iron out.

Also note I plan to put a healthy 150-250 shot of dope!

Are tyere better options or am I on the right track?

 

Dirt track racer runs a setup like hat with great results. Should run damn good with nitrous. With the added benefit of some nice nitrous plates for a 4150 flange. I say go or it!

 

i think it's a great setup for nitrous. better distribution with a plate kit. i think i'm planning to run an induction solutions sledge hammer kit on top of mine. they come blueprinted and mapped with pills between a 150-600 shot.

 

600 shot.... yes!

I know of a certain person running two stage of 300 each on a 416ci in a Fbody.. its fast.

 

a 600 shot is normal to some guys. crazy IMO lol.

 

Go with bigger than a 1000 cfm.. My 1375cfm tb is comparable to a 105mm tb iirc..