Need some comments and opinions on this cam for a 5.3l turbo! Gonna be running this cam, comp 26918 single springs, factory Pistons with rings gapped, factory rods resized for arp rod bolts, 317 heads milled .015 should put me right at 9.5:1, arp head studs, FTI single disc billet converter 3000 stahl, 09 80e with hd2 Kit, 40k cooler, and the same precision 74/75 turbo. Looking to be around 650-700 at the wheels around 15lbs of boost with meth.

<a href="http://s1341.photobucket.com/user/Jordanh1/media/Mobile%20Uploads/image_zpsrs2lrfdq.jpeg.html" target="_blank"><img src="http://i1341.photobucket.com/albums/o756/Jordanh1/Mobile%20Uploads/image_zpsrs2lrfdq.jpeg" border="0" alt=" photo image_zpsrs2lrfdq.jpeg"/></a>
<a href="http://s1341.photobucket.com/user/Jordanh1/media/Mobile%20Uploads/image_zpsi9r652rg.jpeg.html" target="_blank"><img src="http://i1341.photobucket.com/albums/o756/Jordanh1/Mobile%20Uploads/image_zpsi9r652rg.jpeg" border="0" alt=" photo image_zpsi9r652rg.jpeg"/></a>

 

whats the specs on it... damn work computer wont let me see your images?

 

Intake, .561/272 exhaust .561/272 Lobe center 113, intake c.L. 109

The part# is 190225-13 Howard's ls cam

 

it would be ok... not perfect but should be fine. If it were me... i would lower the 222/222 to like a 212/212, 216/216 or 218/218.. lift is lower so you could get by with some LS6 springs.

 

I'm gonna throw it in and see what it'll do with 15lbs of boost

 

I'm actually shipping the cam back...... How do I get ahold of stock48? I'm gonna get him to send be a cam

 

How soon you need a cam? Gonna pull and inspect my JFR 218/218 570/570 112 here shortly

Same cam he went low 8s on

 

Not sure ls6 springs are a good idea with low to mid .5 lift. Won't 15lbs. try to hold the valves open?

 

I'm gonna run a new set of comp 26918 I have laying around.

 

Pretty soon.. I was wanting to put the motor together this weekend and get it in the truck next week, but it doesn't look like that's gonna happen.