Looking for advice on next steps on lq9 c10 build.
Oct 14, 2023 | 10:13 PM
#1
Thread Starter
Teching In
Joined: Oct 2023
Posts: 4
Likes: 0
Looking for advice on next steps on lq9 c10 build.
I have a lq9 swapped 76 c10 that I’m looking to get some more power out of. It’s basically just crammed right now.
texas speed cam:227/234 .600"/.600" 111 LSA
springs
long tube headers
high flow exhaust
3200 stall
been running stock injector until now I have some 50lb injectors waiting to be installed and decided I want to do a tbss intake and 92mm TB since I’m getting it tuned anyways.
Is there any other somewhat affordable mods I can do to get some more power before I take it to the tuner?
I’ve been looking into 243 heads but was told there’s not much of a difference between them and stock lq9 heads
thanks for any help I’ve read tons of threads but am hoping someone can point me in the right direction
texas speed cam:227/234 .600"/.600" 111 LSA
springs
long tube headers
high flow exhaust
3200 stall
been running stock injector until now I have some 50lb injectors waiting to be installed and decided I want to do a tbss intake and 92mm TB since I’m getting it tuned anyways.
Is there any other somewhat affordable mods I can do to get some more power before I take it to the tuner?
I’ve been looking into 243 heads but was told there’s not much of a difference between them and stock lq9 heads
thanks for any help I’ve read tons of threads but am hoping someone can point me in the right direction
Thread
Thread Starter
Forum
Replies
Last Post
