Custom Piston Size
12-10-2007, 04:50 PM
#1
TECH Apprentice
Thread Starter
iTrader: (1)
Join Date: Dec 2005
Location: Cape Cod, MA
Posts: 366
Likes: 0
Received 0 Likes
on
0 Posts
Custom Piston Size
I came accross this piston for sale, here are the specs:
15* LS1 head
4.14 Bore
3.75 Stroke
6.2 Rod
1.15 Compression Distance
-18.58 Dome Volume
.127 Inverted Dome
This is some crazy specs, anyone have any input? Ive been looking around for a 3.75 in crank but only found Callies. Just thought it was an odd stroke to go with, obviously custom specs. I calculated it out to be roughly 404ci.
15* LS1 head
4.14 Bore
3.75 Stroke
6.2 Rod
1.15 Compression Distance
-18.58 Dome Volume
.127 Inverted Dome
This is some crazy specs, anyone have any input? Ive been looking around for a 3.75 in crank but only found Callies. Just thought it was an odd stroke to go with, obviously custom specs. I calculated it out to be roughly 404ci.
12-15-2007, 11:16 AM
#2
I came accross this piston for sale, here are the specs:
15* LS1 head
4.14 Bore
3.75 Stroke
6.2 Rod
1.15 Compression Distance
-18.58 Dome Volume
.127 Inverted Dome
This is some crazy specs, anyone have any input? Ive been looking around for a 3.75 in crank but only found Callies. Just thought it was an odd stroke to go with, obviously custom specs. I calculated it out to be roughly 404ci.
15* LS1 head
4.14 Bore
3.75 Stroke
6.2 Rod
1.15 Compression Distance
-18.58 Dome Volume
.127 Inverted Dome
This is some crazy specs, anyone have any input? Ive been looking around for a 3.75 in crank but only found Callies. Just thought it was an odd stroke to go with, obviously custom specs. I calculated it out to be roughly 404ci.
Nice specs. Sounds like something I would do, but alittle longer Connecting rod and less stroke. Although I have used a 3.778 stroke once and the car almost went nines with it. Good crank size.
Rick
Thread
Thread Starter
Forum
Replies
Last Post
Stainless Works
GM Engine & Exhaust Performance
13
11-05-2015 03:31 PM
FlowmasterMufflers
Sponsor's Announcements, Sales, and Specials
0
07-30-2015 05:03 PM
