The tech department at Crane will gladly help you through this procedure if issues occur. 386-252-1151

 

"Bee-boo-bee....we're sorry, but the number you have reached is no longer in service..."

 

Crane Cams new help line 1-800-GET-LOST.

 

well got them and installed them. think they are a little noisier than my stock setup but i will recheck them as one set of instr. said 1 & 1/2 turns and the other set says 2 turns, i went in the middle at 1 & 3/4. man the truck runs damn hard now too, guess the heads really like the .600 lift from the cam, tranny slips a little after 5k rpm in 1st and second.
ended up putting a set of TEA double springs in it too

Tim

 

2 full turns is the correct method. I've set up a few of these.

 

yeah i think i will go the extra 1/4 turn this weekend, hopefully that will quite things down a little. they arent real noisy but louder than i was thinking they would be.


thanks for the instructions too.

 

ok re-did them today, much better

thanks all

 

Glad I could help out!