I'm starting to get the itch to go faster and think its time for a good cam, what cam would be good for mostly street and some strip, my motor is a stock lq4 with a nelson tune and am open to any suggestions. any help well be greatly appreciated

 

what are you lookin for or what are you goals?

 

just looking for a good street ride, something really quick. maybe get into mid 13's

 

What are your current mods and possible future mods? Anything not in the sig? It's good to match your cam up to what you are considering putting on the truck. What all do you use the truck for?

 

Look at my sig. Do that and you'll have mid 13's easy since your truck is lighter and more aerodynamic. I would suggest going with a 3200+ stall though.

 

wanting to have my heads ported and polished, tbss intake, 90mm tb, maybe upgrade to some different heads (patriot heads, etc), stall, and 4l80e. its just a toy nowadays. the lq4 is bone stock, except for a tune

 

I would prob go with something like what my brother put in his truck. Its a custom grind from texas speed. If you have at least 10:1 compression. His specs are: comp xe-r lobes with 232/236 dur .595/.601 lift 112 lsa with 2 deg advance. Except on your truck i would do 4 deg advance for a little more low end torque. That with like a 3200 to 3800 stall will be and awesome setup!

 

Oh yea and texas speed's custom grind cam prices are the same as off the shelf cams so why not!