07blksilverado

I have a 2008 silverado single cab with a 6.0 with the l92 heads an intake. What cam should I go with I need suggestions. I was told I need a cam with a split in duration for these heads?? I want to get all.the power I can out of it high 7s on motor if possible. Thanks

sand man

if you have them cnc ported for better flow on higher lifts like .550"-.650" lifts
I would go with a custom cam with goals explaned to the cam advisor.

I would recomend you contacting Pat G, he'll set you up with exactly what you want

07blksilverado

There not ported and thank you

07blksilverado

How do I get ahold of pat g?

skeet

iTrader: (18)

those heads flow fine out the box, unless youre going for drastic power then yeah get them ported, i wouldnt use no more than a 6-8* split if youre stating NA to hit the numbers youre wanting its gonna take a big stall big cam, a NNBS intake will work, id look for a 232/238 cam maybe on a 621 lift 113+1 LSA, is this 6.0 have flat tops or dished pistons.

SCOTT_A

iTrader: (1)

Camshaft Help-LS1 Custom Cams-Guerra Motorsports-Patrick G cams

07blksilverado

I'm not to sure on the pistons there stock the motor cam out a 2009 escalade

07blksilverado

I have a 2008 silverado single cab with a 6.0 with the l92 heads an intake. What cam should I go with I need suggestions. I was told I need a cam with a split in duration for these heads?? I want to get all.the power I can out of it high 7s on motor if possible. Thanks

06murder

Look up lsr cams. Eps, Texas speed,summit racing has some good ones...are you wanting custom cam or off the self

1CL3ANSUP3RSPORT

iTrader: (22)

I would get a custom grind cam thru Pat G