Nnbs tahoe 6.0 swap

Reply Subscribe

Thread Tools

Search this Thread

Dec 3, 2013 | 09:08 PM

heavychevy10

Thread Starter

Teching In

Joined: Apr 2010

Posts: 3

Likes: 0

Nnbs tahoe 6.0 swap

Can anyone tell me what is required for a 6.0 swap , and can i use a older 6.0 that has the cable rather than drive by wire?

Dec 4, 2013 | 06:12 AM

iamkeniff

Moderator

iTrader: (16)

Joined: Apr 2007

Posts: 5,365

Likes: 3

From: Gonzales, la

Quote:

Originally Posted by heavychevy10

Can anyone tell me what is required for a 6.0 swap , and can i use a older 6.0 that has the cable rather than drive by wire?

#1 Its your basic engine swap. Then retune. Pretty simple

#2 no you can not without machine work. You need a Gen 4 6.0 (LY6, L76, LS2)

Dec 6, 2013 | 07:56 PM

heavychevy10

Thread Starter

Teching In

Joined: Apr 2010

Posts: 3

Likes: 0

What is the differences between a lq4 and ly6

Dec 6, 2013 | 08:35 PM

Blk09Chevy

Staging Lane

Joined: Nov 2012

Posts: 82

Likes: 0

Reluctor wheel lq4 is 24x ly6 is 58x and diff want heads and some other stuff I'm sure someone will chime in with

Dec 6, 2013 | 09:28 PM

iamkeniff

Moderator

iTrader: (16)

Joined: Apr 2007

Posts: 5,365

Likes: 3

From: Gonzales, la

Knock sensor location valley cover block material reluctor wheel head and intake design. You can go 58x to 24x but not 24x to 58x without machine work.

Dec 7, 2013 | 12:02 AM

heavychevy10

Thread Starter

Teching In

Joined: Apr 2010

Posts: 3

Likes: 0

Quote:

Originally Posted by iamkeniff

Knock sensor location valley cover block material reluctor wheel head and intake design. You can go 58x to 24x but not 24x to 58x without machine work.

So what year 6.o will work in my tahoe

Dec 7, 2013 | 04:52 AM

iamkeniff

Moderator

iTrader: (16)

Joined: Apr 2007

Posts: 5,365

Likes: 3

From: Gonzales, la

2007 up.
It has to be an LY6 or L76
L92 L99 LS3 is 6.2
Best way to tell it is a Gen 4 motor is the knock sensors are on the side of the motor near the oil pan. Front cover has the timing sensor