Originally Posted by iamkeniff

you can not put a "NNBS, TBSS" intake on a 6.2 unless you change heads which is stupid. if you are going FI i would just run a stock intake, look at the ton of guys making 500+ rwhp with a stock intake, baby cam. i dont think you should do an intake swap if you are not doing a 3k set of heads, 1 7/8" LTs blah blah blah.


20rwhp on a stock motor so say yes, but look at wheatley's dyno graph *i am unsure of the gains but i think max was 23-25rwhp i can be wrong on that though*



just put a 72mm with your stock 3.5" exhaust and throw 10psi at it i bet you wont want to waste the 1300 on a intake swap. 800 is intake alone but you will need more parts to make it work so i say 1300

Originally Posted by 62nalide

That's what I was hopin that I didn't need that upgrade if I'd do a turbo by any chance do you know where in Texas can i get a turbo setup installed and tune?

Originally Posted by iamkeniff

nelson performance
Trick
KBRacing can send you a kit

Originally Posted by kbracing96

I'm in Texas now too. just north of Houston.