8 lug conversion?? From 6 lug to 8 lug***
#13
Teching In
Thread Starter
iTrader: (1)
Join Date: Mar 2012
Location: Biloxi, MS
Posts: 37
Likes: 0
Received 0 Likes
on
0 Posts
Wheel Spacers | Wheel Adapters | Lug Adapters
Just remember lock tite and you must torque them. You will be ok if you do those two things.
Just remember lock tite and you must torque them. You will be ok if you do those two things.
That place you showed me only has 6x139.7 to 8x6.5... HD wheels are 8x180 Starting to think they don't make 6x139.7 to 8x180 =(
#14
Lock tite on the adapters itself and lug nuts? I've had 2" spacers before and never put lock tite on them, just torqued them at 150lbs then a week later torqued them again which I really didn't have too. Rode on it for two straight years without any problems. I hope the adapters have the same story..
That place you showed me only has 6x139.7 to 8x6.5... HD wheels are 8x180 Starting to think they don't make 6x139.7 to 8x180 =(
That place you showed me only has 6x139.7 to 8x6.5... HD wheels are 8x180 Starting to think they don't make 6x139.7 to 8x180 =(
I lock tight the adapters. I had adapters on a Police caprice with vette wheels. I almost had a wheel come off with just torque. I locked them up with lock tite and torued em. No problems after that. They just make me nervous. They cant be that bad considering the dually guys run adapters to put semi wheels on and tow a lot of weight.
#15
I'll post pics in a little bit of my 08 4dr z71 1500 and i did a full hd conversion wheels and front end.
Here is a pic but i just read u didnt want adapter lol and thats how i have mine.
Here is a pic but i just read u didnt want adapter lol and thats how i have mine.
Last edited by blue_tbss; 09-04-2012 at 12:44 PM.
#17
Teching In
Thread Starter
iTrader: (1)
Join Date: Mar 2012
Location: Biloxi, MS
Posts: 37
Likes: 0
Received 0 Likes
on
0 Posts
I bet they would make one.
I lock tight the adapters. I had adapters on a Police caprice with vette wheels. I almost had a wheel come off with just torque. I locked them up with lock tite and torued em. No problems after that. They just make me nervous. They cant be that bad considering the dually guys run adapters to put semi wheels on and tow a lot of weight.
I lock tight the adapters. I had adapters on a Police caprice with vette wheels. I almost had a wheel come off with just torque. I locked them up with lock tite and torued em. No problems after that. They just make me nervous. They cant be that bad considering the dually guys run adapters to put semi wheels on and tow a lot of weight.
Here's my old truck on 2" spacers
#18
Thanks, i got the adapters at a local tire shop they ordered them for me i think they ordered them from california, i dont know whats the name of the store though..
I'll take some pics tomorrow if i have a chance.
I'll take some pics tomorrow if i have a chance.