GMT 900 Trucks General Discussion 2007 - 2013 Trucks | General Discussion

1.8 Rockers or LS9 cam? 5.3

Thread Tools
 
Search this Thread
 
Old Sep 24, 2012 | 06:51 PM
  #1  
Droptoplt1ta's Avatar
Thread Starter
Launching!
 
Joined: Nov 2005
Posts: 272
Likes: 0
From: Clinton Twp, MI
Question 1.8 Rockers or LS9 cam? 5.3

I have a 2009 EXT cab with a 5.3 with a few basic mods and am wondering what would be a better gain; 1.8 rockers or the LS9 cam


Thanks!
Reply
Old Sep 24, 2012 | 07:38 PM
  #2  
gamble686's Avatar
TECH Fanatic
iTrader: (3)
 
Joined: Apr 2011
Posts: 1,642
Likes: 3
From: Arizona
Default

Ls9 cam for sure. The rockers will net maybe 5-15hp at best, but the ls9 cam will gain 35-50 and more if you get a tune and haven't yet.
Reply
Old Sep 24, 2012 | 08:07 PM
  #3  
Robert91RS's Avatar
TECH Fanatic
iTrader: (2)
 
Joined: Jul 2010
Posts: 1,031
Likes: 0
Default

Save your money on both and buy a cam designed for a N/A 5.3 motor.
Reply
Old Sep 24, 2012 | 08:08 PM
  #4  
grey matter 04's Avatar
13 Second Truck Club
iTrader: (9)
 
Joined: Jul 2008
Posts: 1,455
Likes: 1
From: gonzales,LA
Default

LS9 in a 5.3 complete turd
Reply
Old Sep 24, 2012 | 10:43 PM
  #5  
Droptoplt1ta's Avatar
Thread Starter
Launching!
 
Joined: Nov 2005
Posts: 272
Likes: 0
From: Clinton Twp, MI
Default

Originally Posted by grey matter 04
LS9 in a 5.3 complete turd

Why do you say that? I have the good flowing 243 heads on my 5.3
Reply
Old Sep 24, 2012 | 11:16 PM
  #6  
TECH Veteran
20 Year Member
iTrader: (36)
 
Joined: Oct 2004
Posts: 4,985
Likes: 54
From: somewhere in TX
Default

Because that cam is designed for boost. A n/a motor is a complete different animal in airflow requirements in relation to cam lift duration and lobe spacing. If you read a bit closer the majority of people who go the LS9 route are also forced induction.
Reply
Old Sep 24, 2012 | 11:26 PM
  #7  
cam's Avatar
cam
TECH Addict
iTrader: (9)
 
Joined: Apr 2004
Posts: 2,380
Likes: 0
From: on the shortbus
Default

Originally Posted by Robert91RS
Save your money on both and buy a cam designed for a N/A 5.3 motor.
^Werd. Listen to wisdom
Reply
Old Sep 25, 2012 | 08:03 AM
  #8  
Jake99's Avatar
TECH Fanatic
iTrader: (5)
 
Joined: Dec 2009
Posts: 1,241
Likes: 0
Default

Yep, ls9 is junk na. Put an ls2 cam in it.
Reply
Old Sep 25, 2012 | 08:17 AM
  #9  
TECH Fanatic
iTrader: (2)
 
Joined: Nov 2001
Posts: 1,124
Likes: 1
From: Michigan
Default

The LS9 cam has way too much exhaust bias for your setup. Get a properly sized cam...something like a 212/218.
Reply
Old Oct 3, 2012 | 04:19 PM
  #10  
skoal bandit's Avatar
TECH Enthusiast
iTrader: (1)
 
Joined: Jan 2009
Posts: 608
Likes: 0
From: Over Yunder
Default

I have a LS9 cam and it BLOWS! no bottom end at all. barely any at middle rpms. pulls decent on top, 4500ish to 6000. It is a dog with no get up and go!
Reply



All times are GMT -5. The time now is 12:52 PM.