I am going to replace the factory front axle hub with the timken products but i am still not sure which timken part number will fit to my application ,i need help

 

I used NAPAs complete assembly. working well with 55K miles on it running 33.5x11.5x17s in the muck and mud almost daily in a heavier truck (less hp but more weight). I'd try the NAPA, if I remember when I looked at the bearing pressed in there it was stamped timken.

 

Just curious, but what is your reason for this?

 

I am getting abs + traction control wile turning ,i took the car to dealer many times at the end they told me that the axle hub need to be change the car ran up to today more than 125k miles the oem axle for 2 costs more than $700 so that i need to look for a good aftermarket axle hub.

 

Yep all you need is the hub assembly. Should be around 160 dollars ea at NAPA. Like I've said, I don't have the same power you do but I'm running a truck that is probably 800 lbs heavier and tires that are easy x2 more weight then the OE tires on the Denali and my NAPAs have lasted longer then the OEs.

 

What do you mean by napa ,is it an aftermarket company or what ineed a part number or a link to buy this item.

 

http://www.napaonline.com/

It a chain auto parts store like Autozone.