What rwhp/tq will my setup make????
#1
Thread Starter
TECH Fanatic
iTrader: (38)
Joined: Oct 2005
Posts: 1,299
Likes: 2
From: cedar bluff,alabama
Just got off the phone with my tuner and he said this setup will put down 325 rwhp, I thought this was a little off, but here are my specs. LQ9,LS6 intake,longtubes,42lbsvo's patriot 226/226-.585/.585 on 112 ,6 -speed trans. This is my daily driver,what would you guys do next???
#4
Originally Posted by nightrunner
is this with full-boltons and if not i say do those next
after that id say get some high-flowing heads and then either boost or juice
after that id say get some high-flowing heads and then either boost or juice
#5
Thread Starter
TECH Fanatic
iTrader: (38)
Joined: Oct 2005
Posts: 1,299
Likes: 2
From: cedar bluff,alabama
Originally Posted by nightrunner
is this with full-boltons and if not i say do those next
after that id say get some high-flowing heads and then either boost or juice
after that id say get some high-flowing heads and then either boost or juice
#7
Originally Posted by nightrunner
here is the end of the quote but i will give no more advice of buying new parts
Trending Topics
#8
Originally Posted by RandomHero
Ooops, I wasn't trying to be a dick about it, but I didn't see him ask what to do next, and I had read a couple other of your posts where you were giving people advice.
the other one from tonight is dozerdans thread where he is asking for advice on what to do next
i usually dont just go out and tell people what to buy but if they ask i give my opinion
i read at least 3-4x as much as i post if not more so ive seen what works( im trying not to sound arrogant here)
not trying to be a dick either i just give advice when asked
#10
Originally Posted by 1969x11
Damn, guys dont get in a pissing contest it just a damned old pickup. Keep it coming, Quik has already told me my injectors are too big for my mods.But I dont want to swap just yet.
IMO you can run pretty big injectors and not have problems and ive never seen a problem of having too big of an injector
btw what injectors do you have
if i were you ( i plan on being able to get a setup up liek this in about a year) id run the 8.1L truck injectors or 8.1L marine injector if you plan on spraying


