Short Belt
Aug 13, 2005 | 10:04 AM
#11
Thread Starter
Banned
iTrader: (4)
Joined: Oct 2003
Posts: 5,151
Likes: 1
From: From Houma La. Living n Ellisville Miss.
Originally Posted by BigKID
I run mine in a 'V' pattern from the crank up to the idler back under the waterpump up to the alternator. I have never done any back to back comparisons with and without it though. I do remember it being a real pain to turn with the 285's up front though. 
I WAS TRYING TO TAKE A PIC BUT CAN'T GET IT ON HERE BUT U GOT IT.ALT. UNDER THE WATER PUMP UNDER THE CRANK AND AROUND THE TENTIONSER PULLY
Sep 6, 2005 | 06:38 PM
#12
Sep 7, 2005 | 09:05 PM
#16
17,16,15,14,13,12,11 Drvr
iTrader: (10)
Joined: Aug 2003
Posts: 6,713
Likes: 0
From: Mont Belvieu, Texas
part # is gates k060605 for the ones useing stock underdrive pulley and the ones useing asp underdrive pulley is gates k060555, i ran at the track with stock belt and ran a 13.44@99.30 and then with the short belt and ran 13.26 100.02
Sep 8, 2005 | 12:14 AM
#18
TECH Resident
Joined: Feb 2005
Posts: 976
Likes: 0
From: Edinburg, TX
Originally Posted by v8
oh yeah this is running the belt over the tentioner,ideler,water pump and crank, remember the water pump runs in a counter clockwise and the crank goes clockwise.
Sep 8, 2005 | 09:44 PM
#20
Thread Starter
Banned
iTrader: (4)
Joined: Oct 2003
Posts: 5,151
Likes: 1
From: From Houma La. Living n Ellisville Miss.
U Make A V Under The Water Pump Under The Crank Pulley Around Alt.pulley And Tenion. Pulley It May All 4 Hp To Rear Wheels But A Ten R 2 Is Good In My Book.