GMT 800 & Older GM General Discussion 2006 & Older Trucks | General Discussion

limp mode?

Thread Tools
 
Search this Thread
 
Old Jul 23, 2008 | 06:29 PM
  #1  
gizzmotk's Avatar
Thread Starter
Teching In
 
Joined: Jan 2008
Posts: 25
Likes: 0
From: Colorado
Default limp mode?

I need help... just put a turbo on my 2000 5.7 tahoe, new tune came in and ran great! no issues for over 100 miles. put the trailer on and pulled a few hills hard and drove aroud awile(45 miles). thought i was good to go......... i left for vacation today. got about 50 miles away i was running warm but not any hoter than I ran towing without the turbo on a hot day about 200~210. anyway pulled over to do a quick check on the trailer... merging back onto the highway it woud not pull past 3000 rpm. limped it to my folks house and no codes. unhooked the tralier pulls hard through first (with a little hesitation aroud 3k) shifs hard into second but limmits out a 3k...
where do i start ? no codes, plugs look good, Wb reads good plenty of fuel
Reply
Old Jul 23, 2008 | 11:00 PM
  #2  
gizzmotk's Avatar
Thread Starter
Teching In
 
Joined: Jan 2008
Posts: 25
Likes: 0
From: Colorado
Default

loose charge pipe after MAS letting just enough air out to make me run too rich
fixed
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Blwn99x
GM Drivetrain & Suspension
4
Mar 24, 2023 11:14 AM
RustyD
8-Lug Truck Performance
4
May 23, 2016 07:04 PM
drummer0415
GMT 900 Trucks General Discussion
11
Oct 24, 2015 08:16 PM
MA$TER_E
Tuning, Diagnostics, Electronics, and Wiring
5
Sep 9, 2015 03:14 PM




All times are GMT -5. The time now is 12:03 PM.