I currently have the engine removed from my truck. I cut off all the injector connectors and sodered on LS1 style connectors to work with my 60lb injectors. I am not 100% sure that I know in what order the connectors go on the drivers side. I was hopeing that someone could help me out and tell me which color wire on the injector harness go's to which cylinder. Thanks for any help you may have!

 

I wish i could help you out, but i won't see my truck again until June 1st when i get back from vacation. i'm sure someone will chime in to help you out though.

 

i don't know. BUT, the wire length should be VERY obvious.

 

 

No it's not really that obvious. It is obvious on the passenger side they are all in a straight row as the come out of the harness. However on the drivers side I don't belive they go in the order of how they look comeing out of the harness that runs a long the drivers side of the engine and go's as far as the alternator. I figured I would remember but it was about 9 weeks ago I removed the engine and now I am second guessing myself. If it was obvious I wouldn't ask for help. Maybe once I place the engine in there it will help but I'd rather be sure rather than guess.

 

Gotcha. I doubted myself a little a little as well, but for me, it was damn obvious. Sorry. My crap is so old that my colors are faded into "other" colors...so lets see if we can dig a schematic up for ya.

****Here's the 2002 Silverado, imagine it it's the same for the 2005.


Black is #1
LT green/Black #2
Pink/Black #3
Light Blue/Black #4
Black/White #5
Yellow/Black #6
Red/Black #7
Dark Blue/White #8

 

Thank you Dewmanshu for your help!