Well It S The Same High Strength Plastic As The Upper Bumper Caps On Our Trucks.... Or If You Look At Dually Fender Flares.

Or A New Style Tahoe/suburban

 

Awsome!!! Thanks so much for your help... I was wondering because I wanted to modify one but working with that stuff can be a pain. Guess I need to find some one who will let me pull a fiberglass mold off there truck.

 

HAHA IF YOU DONT MIND ME ASKING WHAT EXACTLY ARE YOU PLANNIN??

 

Pure Evil Thats all I can say..... No, I don't mind at all. I want to modify it to work with my 2000 silverado front end and make a few sutle changes in the process. Hell I might even modify my steel one to look like it. I am A fabricator by trade And right now I Run a Water Jet Machine part time.

I would like to refurbish my silverado in the next few months after I finish rebuilding my Fathers Old Suburban. Some kid plowed into it doing 50 about 2 months back. My dad decided to go order a new truck so I bought it back from the insurance company. The Frame, left side suspension, and all the basic outer parts plus a radiator need to be replaced. No body damage and didn't set the bags off because it was a side impact. That combined with the fact that it was never wrecked, is pret clean inside and out, and only has about 57,000 original miles on it is why i decided this one needed to be fixed. Plus if you checked the vin already You know That we ordered it with the 454 so It not just your run of the mill family hauler

 

http://cgi.ebay.com/ebaymotors/2005-...QQcmdZViewItem

Are the bumper cap, lower valance and side mirrors on this truck painted factory pieces or aftermarket?

 

thats a regency truck..... regency buys trucks from gm and convert them to that.

so i guess you would say its aftermarket

 

Hmm don't have my vin off hand, but for a 2002 Camaro SS 35th LE (in sig) what are the part numbers for the little black plastic caps that go over the lug nuts?

And for any Lt1 Camaro, what is the part number for an Lt1 radiator shroud.

Many thanks!

 

So do they use parts from the gm parts bin? I am looking for mirrors that I can paint arrival blue. The smooth, painted bumper cap looks much better than the black plastic.

 

I need a part number for a 5.3/6.0 flywheel that has made to mount up the 6 bolt torque converter

 

On my 2000 silverado extended cab I want to change the filter's for the ac blower system. I understand Gm also has some kinda cleaner to spray up into the system to assist cleaning and help eliminate any smells. I will Pm you the Vin in a minute.