Gm Part #anyone?
Jan 28, 2008 | 11:04 AM
#1731
Thread Starter
TECH Senior Member
Joined: Jul 2006
Posts: 7,023
Likes: 0
From: Somewhere around -199C
Jan 28, 2008 | 11:16 AM
#1732
Thread Starter
TECH Senior Member
Joined: Jul 2006
Posts: 7,023
Likes: 0
From: Somewhere around -199C
ya its for the back, im sure they might need trimmed a little but i figure if they arent to much its worth a shot... it would be great to have some rear inner fenders like the Rams and stepside GMs do... dunno GM never did that on the fleetside anyways 
Thanks bud
- also looking for the P/N for this piece off a Denali if you can get that.. its the dark colored interior
Thanks bud
- also looking for the P/N for this piece off a Denali if you can get that.. its the dark colored interior
Jan 28, 2008 | 11:22 AM
#1733
Thread Starter
TECH Senior Member
Joined: Jul 2006
Posts: 7,023
Likes: 0
From: Somewhere around -199C
anyway I could get a few numbers, no rush thanks man!!! ::shake::
Its for a 2001 rcsb 2wd silverado
I need this crossmember
the rusted one that goes under the motor mounts
everything I would need to convert a power door over to a manual door
steering wheel for 99-02 silverado with the steering wheel controls and the coil for the application
thanks man
Its for a 2001 rcsb 2wd silverado
I need this crossmember
the rusted one that goes under the motor mounts
everything I would need to convert a power door over to a manual door
steering wheel for 99-02 silverado with the steering wheel controls and the coil for the application
thanks man
STR WHEEL 15069291
COIL 26087300
DR PANEL
LH 15975999
RH 15976000
DOOR HANDLES
LH 15708051
RH 15708052
WDO HANDLE
15692241
WDO HANDLE PLASTIC BUSHING
15589216
WINDOW REGULATOR
LH 22144289
RH 22144290
Jan 28, 2008 | 11:27 AM
#1734
CHEVRACER83----- Hey man I'm looking for the rubber grommet that goes onto the throttle body, that the stock intake tube slides into. Basically it fits onto the intake tube and throttle body and is secured w/ a hose clamp. Shitty description I know, I was trying to find a pic but can't track one down. Let me know if that makes sense or not, it is the same for all 99-2006 v8 trucks w/ the 78mm throttle body. I am thinking it may be considered part of the stock air intake tube asy.
Last edited by SlvrSierra4.8; Jan 28, 2008 at 11:32 AM.
Jan 28, 2008 | 12:00 PM
#1735
TECH Addict
Joined: Jul 2005
Posts: 2,060
Likes: 0
From: Stockton, CA
shannan,
when you have time could you get the part numbers for the GMC emblem on the front grille, the tailgate handle and the tail gate handle bezel?
for a 07 Sierra Denali
Thanks my friend,
Mark
when you have time could you get the part numbers for the GMC emblem on the front grille, the tailgate handle and the tail gate handle bezel?
for a 07 Sierra Denali
Thanks my friend,
Mark
Jan 28, 2008 | 01:09 PM
#1737
Thread Starter
TECH Senior Member
Joined: Jul 2006
Posts: 7,023
Likes: 0
From: Somewhere around -199C
CHEVRACER83----- Hey man I'm looking for the rubber grommet that goes onto the throttle body, that the stock intake tube slides into. Basically it fits onto the intake tube and throttle body and is secured w/ a hose clamp. Shitty description I know, I was trying to find a pic but can't track one down. Let me know if that makes sense or not, it is the same for all 99-2006 v8 trucks w/ the 78mm throttle body. I am thinking it may be considered part of the stock air intake tube asy.
15769060 IS FOR THE TUBE
Last edited by CHEVRACER83; Jan 28, 2008 at 01:15 PM.
Jan 28, 2008 | 01:13 PM
#1738
Thread Starter
TECH Senior Member
Joined: Jul 2006
Posts: 7,023
Likes: 0
From: Somewhere around -199C
Jan 28, 2008 | 01:25 PM
#1740
Thread Starter
TECH Senior Member
Joined: Jul 2006
Posts: 7,023
Likes: 0
From: Somewhere around -199C
DONT SUPPOSE ANYONE WANTS A SUPERCHARGER FOR A 97-03 3.8?? I CAN GET ONE FOR 200.00 WE TOOK ONE OFF BECAUSE A CUSTOMER COMPLAINED IT MADE A RATTLING NOISE.... BUT AS ANYONE KNOWS WHO OWNS ONE OF THESE THEY ALL MAKE THAT NOISE 
