Gm Part #anyone?
Aug 29, 2007 | 11:29 AM
#1291
Thread Starter
TECH Senior Member
Joined: Jul 2006
Posts: 7,023
Likes: 0
From: Somewhere around -199C
Originally Posted by TurboBerserker
Thanks for looking man. Hey -- you should do a little paypal account and post a link for donations to your liquid lubrication fund. A guy on the diesel site I go to does VIN checks and has a similar thing in his sig -- let's people donate to the cause when feeling appreciative!
THATS A COOL IDEA, AND IM SURE I COULD USE THE MONEY.... BUT I STARTED THIS THREAD JUST TO HELP YOU GUYS OUT, AND I JUST DONT THINK ITS COOL TO MAKE PEOPLE FEEL LIKE THEY GOTTA GIMME SOMETHING FOR DOING IT... THERES ALOT OF PEOPLE LIKE ME THAT JUST TRY TO MAKE RENT EACH MONTH YA KNOW, I WOULD FEEL PRETTY BAD TAKING MONEY OUT OF THEIR POCKETS
Aug 29, 2007 | 03:14 PM
#1292
Originally Posted by CHEVRACER83
DOES YOURS HAVE A FULL VENTER CONSOLE?? OR IS YOURS LIKE A FOLD DOWN MIDDLE SEAT??
YOURS SHOWS A FULL CONSOLE, IF NOT RECHECK YOUR VIN AND REPOST IT...
IF YOURS HAS A FULL CENTER CONSOLE THEN IT WILL BE 12475013
YOURS SHOWS A FULL CONSOLE, IF NOT RECHECK YOUR VIN AND REPOST IT...
IF YOURS HAS A FULL CENTER CONSOLE THEN IT WILL BE 12475013
thanks!
Aug 29, 2007 | 04:16 PM
#1293
Thread Starter
TECH Senior Member
Joined: Jul 2006
Posts: 7,023
Likes: 0
From: Somewhere around -199C
Originally Posted by Superado
that's the console and lid...I'm referring to the seat's fold-down arm rest...it's attached to the right side of the driver's seat...
thanks!
thanks!
OH IM SORRY DUDE
88936774
I THOUGHT YOU MEANT THE FOLD DOWN MIDDLE SEAT LIEK MOST OF US HAVE...
Aug 29, 2007 | 04:18 PM
#1295
Thread Starter
TECH Senior Member
Joined: Jul 2006
Posts: 7,023
Likes: 0
From: Somewhere around -199C
Front Seat Armrest Replacement
Removal Procedure
Set the front seat back in the forward position.
Separate the J-clip at the bottom of the seat using a flat bladed tool.
Remove the 2 push pins at the bottom retaining the seat back cover to the card board.
From the back of the front seat, disconnect the heating element wire connector, if equipped.
Role up the seat cover up to the bottom of the arm rest.
Recline the seat.
From the front of the seat move the seat cushion away from the seat frame to gain access to the arm rest clip.
Remove the rubber band from the clip.
Remove the clip from the seat frame.
Remove the arm rest by pulling outwards.
Installation Procedure
Install the clip in the slot of the seat frame.
Install the rubber band on the clip to retain it in place.
Fold down the seat cover.
Install the arm rest by pressing in until it is fully seated.
Connect the heating element wire connector.
Set the front seat back in the forward position.
Pull down on the seat cover in order to install the 2 push pins retaining the seat back to the card board.
Connect the J-clip at the bottom of the seat.
Push on the seat back cover to ensure the cover is held in place by the velcro.
Removal Procedure
Set the front seat back in the forward position.
Separate the J-clip at the bottom of the seat using a flat bladed tool.
Remove the 2 push pins at the bottom retaining the seat back cover to the card board.
From the back of the front seat, disconnect the heating element wire connector, if equipped.
Role up the seat cover up to the bottom of the arm rest.
Recline the seat.
From the front of the seat move the seat cushion away from the seat frame to gain access to the arm rest clip.
Remove the rubber band from the clip.
Remove the clip from the seat frame.
Remove the arm rest by pulling outwards.
Installation Procedure
Install the clip in the slot of the seat frame.
Install the rubber band on the clip to retain it in place.
Fold down the seat cover.
Install the arm rest by pressing in until it is fully seated.
Connect the heating element wire connector.
Set the front seat back in the forward position.
Pull down on the seat cover in order to install the 2 push pins retaining the seat back to the card board.
Connect the J-clip at the bottom of the seat.
Push on the seat back cover to ensure the cover is held in place by the velcro.
Aug 29, 2007 | 04:48 PM
#1299
Sorry if this has already been asked but I searched and couldn't find it. anyway's. I just bought a 2001 zo6 cam used and I want to verify it is what it is before I install it. the only numbers I see on the cam are on very back and are displayed :
0950
s 06
0174
there is also an "E" and a "3" stamped separately on the end.
Any help would be appreciated,
mike
0950
s 06
0174
there is also an "E" and a "3" stamped separately on the end.
Any help would be appreciated,
mike
Aug 29, 2007 | 05:01 PM
#1300
Thread Starter
TECH Senior Member
Joined: Jul 2006
Posts: 7,023
Likes: 0
From: Somewhere around -199C
Originally Posted by Superado
HOLY CRAP!!!
that armrest is $217.11 !!!
I believe I will use your removal instructions and have it reupholstered...
that armrest is $217.11 !!!
I believe I will use your removal instructions and have it reupholstered...
SORRY BRO SHOULDA TOLD YOU IT WAS EXPENSIVE.
