Gm Part #anyone?
Jul 18, 2007 | 12:46 PM
#1171
Thread Starter
TECH Senior Member
Joined: Jul 2006
Posts: 7,023
Likes: 0
From: Somewhere around -199C
Originally Posted by VTODD
i would appreciate the part numbers for the door-side molding off of the NNBS 2007 silverado LT's. black to be specific, unless its paintable only. i wish i could provide more details, but thats the only way i can describe it. my LS NNBS didnt come with them, but today i saw a LT NNBS silverado with the side-panel thingys on the doors.
thanks!
todd
thanks!
todd
25782648.... LOOKS LIKE THE SAME FOR BOTH SIDES... AND YES THEY ARE PAINT TO MATCH
Jul 18, 2007 | 12:49 PM
#1172
Thread Starter
TECH Senior Member
Joined: Jul 2006
Posts: 7,023
Likes: 0
From: Somewhere around -199C
Originally Posted by y2k_ta
2000 Trans Am
I need part numbers for the following:
1) Engine wiring harness
2) The rubber/plastic pcv hose that surrounds the intake
3) Both fuel injector wiring harnesses (if separate from the engine wiring harness)
4) The black plastic airbox base
5) The plastic that runs around the base of the windshield
Thanks,
Scott
I need part numbers for the following:
1) Engine wiring harness
2) The rubber/plastic pcv hose that surrounds the intake
3) Both fuel injector wiring harnesses (if separate from the engine wiring harness)
4) The black plastic airbox base
5) The plastic that runs around the base of the windshield
Thanks,
Scott
IS THE T/A A MANUAL TRANS?? OR AUTO?
IF YOU COULD GET ME THE VIN IT WOULD HELP ALOT
Jul 18, 2007 | 12:50 PM
#1173
Thread Starter
TECH Senior Member
Joined: Jul 2006
Posts: 7,023
Likes: 0
From: Somewhere around -199C
Originally Posted by colyneedsv8
DID THIS COME WITH THE RUBBER FLOOR?? ARE YOU LOOKING FOR MATS?
I HAVE NO RPO INFORMATION ON THIS VIN YET... ANY HELP WOULD BE GREAT
Jul 18, 2007 | 12:52 PM
#1174
TECH Resident
Joined: Nov 2006
Posts: 881
Likes: 1
From: San Antonio
Originally Posted by CHEVRACER83
DID THIS COME WITH THE RUBBER FLOOR?? ARE YOU LOOKING FOR MATS?
I HAVE NO RPO INFORMATION ON THIS VIN YET... ANY HELP WOULD BE GREAT
I HAVE NO RPO INFORMATION ON THIS VIN YET... ANY HELP WOULD BE GREAT
Floor carpet from 2wd, RCSB, 2007 NNBS, LT
thanks
Jul 18, 2007 | 12:55 PM
#1176
Thread Starter
TECH Senior Member
Joined: Jul 2006
Posts: 7,023
Likes: 0
From: Somewhere around -199C
Originally Posted by colyneedsv8
need the part number for the actuall carpet, the VIN i posted had the dark carpet.
Floor carpet from 2wd, RCSB, 2007 NNBS, LT
thanks
Floor carpet from 2wd, RCSB, 2007 NNBS, LT
thanks
IM SORRY LEMME SEE IF I CAN GET AHOLD OF GM AND GET IT FROM THEM
Jul 18, 2007 | 04:51 PM
#1177
Thread Starter
TECH Senior Member
Joined: Jul 2006
Posts: 7,023
Likes: 0
From: Somewhere around -199C
Originally Posted by y2k_ta
2000 Trans Am
I need part numbers for the following:
1) Engine wiring harness NEED TO KNOW MANUAL/AUTO?
2) The rubber/plastic pcv hose that surrounds the intake PCV PIPE 12590632
3) Both fuel injector wiring harnesses (if separate from the engine wiring harness)
4) The black plastic airbox base BASE OF AIRBOX 25166571 RAD SUPPORT 12455209
5) The plastic that runs around the base of the windshield LH 10299673 RH 10246203
Thanks,
Scott
I need part numbers for the following:
1) Engine wiring harness NEED TO KNOW MANUAL/AUTO?
2) The rubber/plastic pcv hose that surrounds the intake PCV PIPE 12590632
3) Both fuel injector wiring harnesses (if separate from the engine wiring harness)
4) The black plastic airbox base BASE OF AIRBOX 25166571 RAD SUPPORT 12455209
5) The plastic that runs around the base of the windshield LH 10299673 RH 10246203
Thanks,
Scott
THERES SOME
Jul 20, 2007 | 03:14 PM
#1178
TECH Apprentice
Joined: Feb 2007
Posts: 386
Likes: 0
From: Houston, Tx.
im wanting to buy the steering wheel shaft that is causing the "thumping" sound and i was told that it was part number 19153614. i was also told that it was the intermediate shaft. today i called a dealership and they told me that this part number was for the lower shaft. is this true? if so, which part is the part that has to be swapped out to stop that "thumping" sound?
Jul 20, 2007 | 06:18 PM
#1179
GFYS and STFU
iTrader: (8)
Joined: Jan 2007
Posts: 13,870
Likes: 4
From: Here and sometimes there too.
Hi shannon! Just wanted to thank you for all the help you give us!
Now that I'm done kissing ***...looking for the part # for a 3-bar sensor for my 6L project. It's for a 2005 sierra. Do you need the vin?
Now that I'm done kissing ***...looking for the part # for a 3-bar sensor for my 6L project. It's for a 2005 sierra. Do you need the vin?
Jul 20, 2007 | 06:25 PM
#1180
Thread Starter
TECH Senior Member
Joined: Jul 2006
Posts: 7,023
Likes: 0
From: Somewhere around -199C
Originally Posted by GTOsRamairSilverado
im wanting to buy the steering wheel shaft that is causing the "thumping" sound and i was told that it was part number 19153614. i was also told that it was the intermediate shaft. today i called a dealership and they told me that this part number was for the lower shaft. is this true? if so, which part is the part that has to be swapped out to stop that "thumping" sound?
19153614 IS THE CORRECT INTERMEDIATE SHAFT.... TAHT WILL STOP YOUR THUMPING.
