GMT 800 & Older GM General Discussion 2006 & Older Trucks | General Discussion

ever heard of this?

Old Nov 21, 2005 | 01:52 AM
  #1  
PSM's Avatar
PSM
Thread Starter
TECH Fanatic
iTrader: (3)
 
Joined: Jun 2003
Posts: 1,218
Likes: 1
From: New Hampshire
Default ever heard of this?

"GM says it will produce a 4.3-liter "XV8" engine with direct-injection technology. This engine will feature a narrow 75-degree bank angle with two camshafts in the block and a three-valve-per-cylinder architecture. The XV8 will also have air-assisted fuel injection to help make sure the fuel is properly atomized as it is sprayed directly into the cylinders.

GM claims the engine will produce up to 300 hp in a package much smaller than a conventional V-8. GM's GDI technology also allows the engine to run at a relatively high 10.75:1 compression ratio while still using regular-grade gasoline, which should further enhance efficiency. The greater specific output, power density and efficiency due to the integration of GDI with other technologies will surely cause it to be applied to other GM engines."

That would be interesting... dual under head cams lol


Full article here click!

more XV8

Last edited by PSM; Nov 21, 2005 at 01:59 AM.
Reply
Old Nov 21, 2005 | 02:25 AM
  #2  
TECH Enthusiast
iTrader: (2)
 
Joined: Jun 2005
Posts: 679
Likes: 0
From: LAFAYETTE
Default

I don't know about all that but, what I do know is that I have a 4.3. When I put 93 and a few gallons of 100 in the tank my **** still detonates @ high rpms. Just my 2

Seth
Reply
Old Nov 21, 2005 | 05:35 AM
  #3  
5.3AlmnBlk's Avatar
TECH Enthusiast
 
Joined: Aug 2005
Posts: 538
Likes: 0
Default

This is the technology they use on the isuzu rodeos i think they were able to push 250hp out of a 3.5 (not that high but) i would think if they made a 4.3 they would definatly reach 280-300.
Reply
Old Nov 22, 2005 | 06:28 PM
  #4  
negativeswitches's Avatar
TECH Fanatic
iTrader: (15)
 
Joined: Feb 2005
Posts: 1,087
Likes: 0
From: belleville, il
Default

Originally Posted by extendocab
I don't know about all that but, what I do know is that I have a 4.3. When I put 93 and a few gallons of 100 in the tank my **** still detonates @ high rpms. Just my 2

Seth
might be from your descreened maf do a search on it for the v8's no one reccomends it
Reply
Old Nov 22, 2005 | 10:24 PM
  #5  
MikeGyver's Avatar
TECH Veteran
20 Year Member
Loved
Liked
Community Favorite
iTrader: (5)
 
Joined: Jun 2005
Posts: 4,515
Likes: 242
From: Suburban Chicago
Default

It'll be nice when they make a 6.0 or bigger engine with that technology. I'd take my 300 HP over a 4.3 liter's 300 HP any day.
Reply
Old Nov 22, 2005 | 10:32 PM
  #6  
CrabhartLS1's Avatar
TECH Fanatic
 
Joined: Jul 2005
Posts: 1,243
Likes: 0
From: Dallas
Default

Any word on what their aftermarket potential will be? I'd be all for those motors if you could get 800+hp out of them.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
calsdad
8-Lug Truck Performance
34
Jun 14, 2023 11:07 PM
Vortec350ss
FUEL SYSTEMS
43
Oct 10, 2015 09:11 PM
jamesm32
GM Drivetrain & Suspension
0
Sep 24, 2015 11:49 AM
La Grey 1
Drivetrain & Suspension
3
Sep 21, 2015 11:07 AM
FlowmasterMufflers
Dodge Engine & Exhaust Performance
0
Sep 18, 2015 02:31 PM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 11:03 AM.