Are the doors for a 99-02 Silverado the same as the Tahoes and Suburbans?
I'm thinkin of converting my 00 Silverado 2500 from manual everything to power and since the bottom of my doors are pretty rusty was thinking of just picking up a complete door. I know I don't have to deal with all the bcm bullshit that the 03+ have too but wasn't sure if a power door from a Tahoe or Suburban would work.

 

Doors are all the same the electronics in them are another story.99-02 is one generation 03-07.5 are another generation. The bcm is still an integral part of the door locks on 99-02 some trucks have all of the wiring in them already some done. You pretty much have to pull a bcm pinout for the door locks on the year model your truck is and see if the wiring is present. If so you just need to snag a uplevel BCM and plug the door harness' into the junction block on each side and you are good to go.

 

I'm in the exact same position VTJosh is in. I have a base model 2001 rcsb and just bought some complete electric doors off a 2002 ecsb. What else do I need?

 

Bump!