I e-mailed coldfusion and asked them what was included in their EFI wet shot kit. Here is what is included:

1 x 10lb Nitrous Oxide Bottle In blue

1 x Pair of steel powder coated Bottle brackets

1 x Nitrous Oxide Solenoid capable of 200hp gains

1 x Fuel Solenoid capable of 200hp gains

8 x jets for a wide range of HP settings

1 x 12 inch Blue stainless steel braided hose

1 x 12inch Red stainless steel braided hose

1 x 15 foot stainless steel braided hose (for bottle to solenoid)

1 x Pro Fogger Nozzle

1 x 4an Bottle Nut

1 x wide open throttle switch (used to activate the system when at full
acceleration)

1 x heavy duty fuel line to attach into the main fuel line via the fuel line
adapter

1 x fuel line tee adapter

1 x fuel line adapter fitting

1 x nitrous oxide pressure gauge to go on your bottle

4 x fuel line clamps to ensure no leaks

1 x dual solenoid mounting bracket

1 x pack of screws for mounting

1 x solenoid fitting to attach your fogger

2 x blue solenoid fittings to attach your bottle to solenoid and your
solenoid to fogger

You will also receive complete installation instructions


For $489 I think it's the best deal out there, what do ya'll think? I plan on getting the fuel pressure saftey thing, a window switch, bottle warmer, and remote bottle opener.

 

that is a damn good deal man go buy it right now. i think they are near me somewhere. i have talked to them before and they were very informative and cool.

 

I will when I can afford it, the cool thing is that $489 is the regular price!

 

Hit up Nitro Dave too. They have a lot of competition going on.

 

I just got real leary of ColdFusion when they 1st became a sponser a couple of months ago and where bascilly copying Nitro Daves Sales and doing some other real shady stuff. I think the guys member name was WholesaleNitrousMike. He pissed alot of people off. They might have a bad *** setup but that did it for me. Richard go to the n20 section and ask that question. Those guys in there are very helpful and informative!

 

I only know that Reher Morrison likes there BBC direct port nozzle setup.

 

That's what I was getting at .. but I couldn't say it.

 

Don't know the vendor, but it looks like a complete set up to start with.
It is the best bang for the buck,and you'll have it on in an afternoon.
You will only get about three good shots to the bottle though. After that it'll run real fat and be slower than stock.
I didn't see a pressure gauge? you'll need one with a warmer.
Your back tires won't like it. But you will.

 

They haven't pissed me off I've asked about them before and what I gathered from that is that their quality is just like everybody else. So why pay $100 more for another kit that's just as good?

 

hmm well another sponser dynotune has a complete nitrous kit for 469. you might wanna check that out too
http://www.speedshop.org/store/scrip...?idCategory=46