well get-ur-done lol have fun and be carefull, oh yeah he is 4wd so traction wont be an issue.

 

From The Pass Of Seeing Some Of These Cars My Friend Ran 12.46 With Hand Held,muffler, 4.10 Gears. I Would Say He Would Be Mid 11.'s But U R Not Cutting It To Short Either I Think It Would Be Good Close Race On The Street In 4 Hi I Would Put My Money On U Cause He Is Going To Spin.

 

pray that he doenst hook up. lol

 

Get a video camera and just do this ****!!!!

Thats the only way your going to know!!!

People run different times, in different parts of the country!!!

The best I could manage with Headers, Tune, and CAI was a 16.3....

Most people claim 15.3-15.5 with those mods!!!

 

Im going to have the setup in by the end of this month it will take a week or two to get it dial in and broke in then Im going back to Texas hopefully for TR Shootout on Nov. 12th. If I do make it back for that then I will see if he wants to race and for sure get it on video. I would run him in 4hi of course and it would be on the street not the track, I figure it is my best chance of beating him cause he probably wont hook good. One of my good friends from houston had a 2000 T/A with an M6 and he ran 13.1's all day long in 70* weather thats why I was thinking I could take him on a 150 shot even if he sprayed. My 14 second pass was on 32" all terrain tires, and a 3000 stall on the new setup I am going with 30" tires, cal-tracs, and a 3400 stall so i think I should be coming out of the hole alot harder with the new setup. I hope to have so 1.7ish 60ft times that would be sweet. Even if I dont get to race him for whatever reason Im going to Austin when I come down then me and Closet Redneck are going to a local hangout and Im sure there will be an f-body there to play with.

 

Im pretty sure that LS1s have the same stock rockers that the trucks do. Just the run of the mill non roller 1.7 ratio. They have roller lifters stock as do trucks an any other Gen III.

 

The LS1's have the same rockers as us stock. I bought a set of stock LS1 rockers when I killed my first set and they were off a t/a. They are friction tip style rockers just like ours. The fulcrum may have bearings I dont know I havent looked at them though.

 

ALL gen3s have STOCK roller rockers and roller lifters.

 

Oh no. My suspicions were right

 

Yes true they do have roller lifters but the tips of the factory rockers are friction tipped not roller tipped.