Anybody found a place to get L92s?
09-11-2006, 07:10 AM
#11
TECH Veteran
Originally Posted by 1slow01Z71
Im not concerned with heads Im getting some from WCCH that are going to be alot better for higher boost, just wondering if anyone knows what the going rate is on teh blocks. The crank are really cheap for them brand new but the rods are damn near 80 a piece, LS7 titanium rods can be had for 83 a piece
The L92 heads are thin, according to Richard and wouldnt hold up well to the 20+psi the stroker motor will see.
The L92 heads are thin, according to Richard and wouldnt hold up well to the 20+psi the stroker motor will see.20+PSI??? You need to make it hold together for a bit before even thinking of boosting it, let alone 20+PSI.
09-11-2006, 07:48 AM
#12
TECH Senior Member
iTrader: (6)
Join Date: Jul 2005
Location: Decatur, AL
Posts: 5,257
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by zippy
20+PSI??? You need to make it hold together for a bit before even thinking of boosting it, let alone 20+PSI.
09-11-2006, 09:10 PM
#18
Banned
iTrader: (4)
Join Date: Oct 2003
Location: From Houma La. Living n Ellisville Miss.
Posts: 5,151
Likes: 0
Received 1 Like
on
1 Post
Originally Posted by 1slow01Z71
Im not concerned with heads Im getting some from WCCH that are going to be alot better for higher boost, just wondering if anyone knows what the going rate is on teh blocks. The crank are really cheap for them brand new but the rods are damn near 80 a piece, LS7 titanium rods can be had for 83 a piece The L92 heads are thin, according to Richard and wouldnt hold up well to the 20+psi the stroker motor will see.
The L92 heads are thin, according to Richard and wouldnt hold up well to the 20+psi the stroker motor will see.well i have a guy that worh hand and hand with gm and not to bad mouth anyone their is not a person port work can compare to the l92 heads and the guy said the heads would hold about 25 lbs of boost.just think on a 4.03 bore i will be running a 2.25 valve.commen sense will tell you that with that kind of vavle difference they will out flow any head on the market.this is why i change my mind about the vic. jr intake they will not work together.
09-11-2006, 10:31 PM
#19
GMPP is making a carb intake with rails and tb for less than 500 here soon, you still will have slight problems with valve shrouding even on a 4.03 bore with those large of valves. I dont know for sure what heads Im going with but I dont think Im going to go with the L92s unless Richard can come up with some good numbers for less than what the edelbrocks I want.
Thread
Thread Starter
Forum
Replies
Last Post
SWINGRRRR
GMT 800 & Older GM General Discussion
5
09-03-2015 07:49 PM
