bohr898

iTrader: (6)

EDIT: I also have 80e flex plate and spacer

I have a 4l80e 4x4 trans and 2400-2600 converter I am looking to trade for a t56 to put in my camaro

I also have both front and rear drive shafts and cross member modified to fit the 4l80 + the necessary harnesses. Also I could trade transr cases or just sell the conversion transfer case input. (It's a very simple swap)

The 4l80e is an 05 and had 56k miles when I did a complete rebuild 9 months ago (has roughly 7k on rebuild) and replaced everything. Borg Warner high energy clutches. New sprags and 1 way clutches. Complete transgo hd-2 kit installed. Also every bearing was replaced with new. also has new trans pump... I did not cut a single corner because I planned on having this for years to come but now I am bringing the truck back to stock and it will be just a tow pig


Looking for 2200 for the trans plus harnesses. I can also ship


Let me know if interested


Thanks


Ps I can swap it to a 2wd if you purchase the output shaft and the rear part of the case if interested

ShredSled

iTrader: (11)

what was this in, reg. cab, extended or crew? Just wondering what the driveshafts would fit.

happen to have the 32 spline input gear for transfer case?


I bet shipping to MI woud be ridiculous though...

bohr898

iTrader: (6)

It was removed from a 2002 extended cab z71. (New u joints installed also)

bohr898

iTrader: (6)

Yes I also have the 32 spline inputshaft. It fits in the 246 autotrac transfer case. Possibly the manual case also but I am unsure

bohr898

iTrader: (6)

Bump. I also have 80e flex and spacer