WTB Stock Rear Springs for 03 ECSB
#1
I have an 03 ECSB and the rear doesn't sit level from side to side. I need another set of leafsprings. If any body has a set pm me with a price.
Thanks,
Thanks,
#3
I tried a search the other day to see if this was a problem and I couldn't find anything. I measured mine from the axle to the frame and there is 5/8" difference from driver's side to passenger side. You are telling me this is typical?
#4
Originally Posted by blackraven
I tried a search the other day to see if this was a problem and I couldn't find anything. I measured mine from the axle to the frame and there is 5/8" difference from driver's side to passenger side. You are telling me this is typical?
http://www.gmfullsize.com/forum/show...highlight=lean
http://www.gmfullsize.com/forum/show...highlight=lean
just two threads..too lazy to search anymore
Last edited by xlcooplx; Apr 1, 2007 at 05:55 PM.
#5
Thanks for the help on this one. It looks like my options are to live with it the way it is, buy a shackle and over compensate for the lean, or if somebody has an unwanted spring try and match it up to either side of my truck. Sounds like I have a no win situation unless I get drop springs but then I lose load capacity.
#6
I have a set of stock '07 classic RCSB springs with like 600 miles on them. If they fit. All I would want is just a little cake to make it worth driving to a place to ship them. BTW I live in CT (ya ouch) PM me if interested.
#7
like i say, dont do springs. get a shackle, put it in the bottom hole (1" drop) and put it on the drivers side of the truck. since the drivers side is approx. 1" lower, a 1" on the drivers side and a 2" shackle on the passenger side will level things out. if you dont want to do this, get a 1" lift shackle and put it on the drivers side (assuming you have stock shackle on the passenger side).
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
mrgrim
GMT 800 & Older GM General Discussion
0
Jul 8, 2015 08:12 AM




