my local dealer wants 8 bucks a stuf and 3 bucks per nut and Im not paying that. So anyone have enough studs and nuts to do both exahust manifolds? Thanks

 

If u r still lookin I just put long tubes on my truck and I'm pretty sure the studs are in good shape. Ill double check in am Not sure if its worth the shipping for ya.

 

ARPs are like $80 for the set... Not a bad deal IMO if you want to or need to do them

 

Didnt someone use v6 studs and they worked out very well?

 

you can get all the studs and nuts for around $40 iirc from gmpartsdirect if you can wait a week..

edit: their cheap but i think they charge alot for shipping. part# that i have are stud-11589154, nut-11609746. they are different quanitys so make sure you order the right amount..

 

unfortunantly gmpartsdirect doesnt ship to canada grrrr

 

The cam gear pump works fine for filtered WVO or used motor oil Babington heaters and I have installed it on my Babington style heaters. Ldu Company's stock number is 450516 , The only thing about the cam gear pump is that the fire kind of pulses as the cam gear rotates. If you use the spur gear pump that is LDU's stock number 450512 then you get a steady non-pulsing fire. The WVO pump website is http://www.liangdianup.com/subpages/oilpump_1.htm or you can click through to the tools section from the home page at www.LDUcompany.com

LDU Company also has other parts that I use for building my waste oil burners, like gear reduction motors. I find it best to turn the pump slower because you really don't need a whole lot of oil dripping on the atomizer ball.

 

 

more like spam

 

sorry didnt know that..