Anyone got em laying around or know where I can get em. Need both manifold and intake

 

intake you can go to the dealorship and buy. i paid around $11 after tax for it so itll probably be around $15 for the intake(PN 12558346). then you can make your own exhaust blockoff.

i removed the egr and cut off the little flange and used the peice that bolts up to the manifold as a stencil.

i used a pair of vice grips and squeezed the little stencil and the plate that i was using and hit it with the grinder until it was flush with the stencil all the way around. drill press to make the holes and then a bit of BBQ pit spray paint. looks factory

if you dont have the tools to do it yourself just take the "stencil" to a machine shop and they can make one up in about 10 minutes

 

cool dude i have all the tools to do it i was actually thinking about doing it that way, can i fab the one for the intake i have not had it off yet so i dunno what it looks like under the egr tube.