Like the title says I need some 4.030 bore forged pistons for nitrous use. I can use anything from flat tops down to a 12cc dish. Or if any sponsors are having some deals let me know. I don't want to spend more than $750 including rings. Any good places to buy? I found the mahle powerpack for $766 shipped on ebay and can get 8% cashback but there is always a better deal.

 

I am not sure what your goal CR is and what CC the head you are using is, but I have some pistons in my 408 with 0 miles and Total Seal rings, they are SRPs and have a 32cc dish. They are in my 408 I built for my turbo project in my Camaro. I know it is more dish that you wanted but I didn't know if it was something you could work with

 

that CR would be way too low. I am using 64cc heads and want 11.0-11.5 CR.

 

I have a set of flat top Mahle 4.030" with rings and pins... brand new ofcourse sitting in the box on my workbench.

 

With a 64 cc head and the stock MLS gasket that would be right at 11.1 so that would be right at your target

 

So are they for sale or do you just have them? PM me if it was a serious post.

 

everything is for sale

 

HOw much are you asking for them?

 

$500 and they're boxed and shipped first thing monday morning.

 

Flat tops would give me 12:1 CR and 8.8 DCR using my 64cc heads. I'm researching to see if it would do OK on pump gas. Right now it looks like I'm better off doing some 8-12 dished pistons so I can have 11.5ish compression. I'll let you know though.