Selling cam that came out since I went a bit smaller. Cam is for engines that have 12606358 cam phaser. I installed in a 4.8 ext cab 4x4 with 3.42 and a 2800 converter and it was just to much to tow with. I didn't have much vac to stop my boat so it had to go. If you have a regular cab 4.10 and 3400+ stall I think it would work good in a 4.8. It really came to life after 3400. I have some idle clips also and it sounds really good at a 800 rpm idle. Specs are 219/229 .550/.550 114 and was put in this last March. Only really use truck when I need to pull boat so it may have 2000 miles on it. 150.00 obo.

 

bump.

 

4.8=needs 3200+ stall and 4.10+
5.3=needs 2800+ stall and 3.73+
6.0/6.2=mean cam will work with or without a stall and gears.
Bump for a killer deal.

 

I'd be interested. Message for number? We can talk.

 

Sorry havent been on for a while pm'd you and you may txt, I work in a call center so its hard for me to be on the cell during work...

 

Bump.

 

sounds badass below 1k rpms... bump for ya

 

So it would work perfectly 6.0 that that's pretty much stock

 

Yea as long as you have VVT it will work fine. I ran with the LS6 springs and a 7.4 pushrod in my app.

 

bump.