creederado

99 5.3 y-pipe. Cats removed replaced with SS 2.5 pipe and 3 bolt flanges to bolt up to AZ headers.
I made 2 of these this winter and want to get rid of it. Needs to be cut and welded to fit on another truck unless all AZ headers are exactly the same. Make offer-

2)Borla phantum tips 2.5 inlet 3.5 o.d.- make off
step side clears- make offer+shipping
stock steel driveshaft- 25+ship
4" shakle and hanger kit- make offer
rear step side bumper complete onyx black- make offer

Rims sold-thanks-04/04/03

<small>[ April 04, 2003, 04:16 PM: Message edited by: creederado ]</small>

whitt1

I'm interested in the 16x9.5"wheels if they will fit a 01 Tahoe.I need wheels to mount some drag radials on.Send me a message monday and I'll give you the 800#at my office to work out payment details.

01 5.3

iTrader: (10)

If he doesn't take the wheels let me know how much shipping would be to 42539 and I may take them.

creederado

16x9.5 with a 5" backspace. Any more backspace on a 16 rim will come too close to comfort on the brake caliper bolt head. Should clear tahoe no problem. Fit great on my stepside. I can test them on my fathers tahoe Wednesday. I will also call Centerline tech to double check wieght load from tahoe. My truck is about 4200 w/me and tonneau.
<img border="0" alt="[burn out]" title="" src="graemlins/gr_burnout.gif" />
btw I purchased 28x11.50x16 MT et streets at jegs with tubes for a good price. Hoosier makes that size also.

whitt1

Thanks,that sounds great I need all the help I can get hooking the supercharged beast at the dragstrip.I'm making well over 400ft/ft of torque and have a 3000rpm stall convertor.

creederado

sold wheels - <img border="0" alt="[burn out]" title="" src="graemlins/gr_burnout.gif" />

02chevyracing

iTrader: (1)

SO WHATS UP WITH THIS PIPE IT IS CUSTOM MADE. HAS IT EVER BEEN USED, BECAUSE I THOUGHT I RED THAT YOU MADE 2. WILL BOLT UP TO THE STOCK MANIFOLDS?
AND WILL IT WORK ON MY 02 5.3? REG. CAB.?

creederado

It's the stock y-pipe with the cats cut off. In replace of the cats is 2.5 pipe with 3 bolt flange. The 3 bolt flange will work only with the Arizona speed and marine headers. Due to the fact another truck might be different with the headers slight modification will prolly be done. Unless you have AZ headers this pipe would not help. The pipe has not been used long since the cats been cut off. <img border="0" alt="[cheers]" title="" src="graemlins/gr_cheers.gif" />

02 SilveradoSS

I sent you an email about the y-pipe.

CashDudeHomie

iTrader: (5)

Is the y pipe sold? I am interested.