Polished Canton Intercooler Overflow Tank
Feb 6, 2009 | 01:32 AM
#1
Thread Starter
TECH Resident
iTrader: (24)
Joined: Jul 2006
Posts: 879
Likes: 0
From: Ft.Lauderdale, FL
Polished Canton Intercooler Overflow Tank
This came with the MP122HH that I bought from Devin (moregrip). Decided not to use it and to go with a powdercoated black one.
The buildup on this thing starts on post #1575 in grips thread.
I asked him how much he had into it, and he quoted the following:
$160-170 for the tank
$25 for the bracket
Polishing $100
Brass hardware was $20
Fab work $60 (tig welding the mounting brackets, etc)
So about $375 into it. I have some plans on buying some new stuff, so I am going to sell this one. Looking to get $225 shipped.
The buildup on this thing starts on post #1575 in grips thread.
I asked him how much he had into it, and he quoted the following:
$160-170 for the tank
$25 for the bracket
Polishing $100
Brass hardware was $20
Fab work $60 (tig welding the mounting brackets, etc)
So about $375 into it. I have some plans on buying some new stuff, so I am going to sell this one. Looking to get $225 shipped.
Feb 6, 2009 | 05:42 AM
#3
Thread Starter
TECH Resident
iTrader: (24)
Joined: Jul 2006
Posts: 879
Likes: 0
From: Ft.Lauderdale, FL
if you look at grips thread, you'll see. But it mounts behind the stock coolant tank, underneath the fender brace on the passenger side of the vehicle.
edit: or you can mount it wherever you want without the bracket.
edit: or you can mount it wherever you want without the bracket.
