My (Grips old) Polished MP122HH MagnaCharger FOR SALE
#1
Thread Starter
TECH Resident
iTrader: (24)
Joined: Jul 2006
Posts: 879
Likes: 0
From: Ft.Lauderdale, FL
Some things have come up and I am contemplating on selling this. It is currently sitting on my engine block however it has not been started, so everything is in the same condition as when it came off Grip's truck.
Here is what you get Some quoted directly from grip's previous classified):
-Polished MP122HH blower with 60lb injectors, every bolt replaced with ARP 12pt hardware, 90mm WCCH J-Tube.
-Polished Canton oversize intercooler tank w/bracket
-Custom dual heat exchanger with dual puller fans and brackets
-Polished Idler pulley bracket and snout support
-METCO 100mm Idler Pulleys with ARP hardware
-Over 2g's in custom polish and ARP hardware
-Every detail meticulously handled (you all know what he's done to it)
-90mm LS2 Throttle Body, polished like chrome & 12-point stainless ARP hardware to mount it
-Braided Stainless fuel lines and AN fittings
-Fuel Pump from MagnaCharger
-Air Intake Tube from MagnaCharger
-Gates 113.5 6-rib Belt
-Fuel Injector harness pigtails
-four 8-rib blower pulleys for those wanting to go 8-rib
I have roughly $6,000 into this thing...
This will ship exactly how Grip sent it to me, in heavy duty Magnacharger-style boxes with blown foam to secure the load. Grip took meticulous care of packing this thing, and I shall do the same!
Serious inquiries only please. $5,300.00 FIRM.




Here is what you get Some quoted directly from grip's previous classified):
-Polished MP122HH blower with 60lb injectors, every bolt replaced with ARP 12pt hardware, 90mm WCCH J-Tube.
-Polished Canton oversize intercooler tank w/bracket
-Custom dual heat exchanger with dual puller fans and brackets
-Polished Idler pulley bracket and snout support
-METCO 100mm Idler Pulleys with ARP hardware
-Over 2g's in custom polish and ARP hardware
-Every detail meticulously handled (you all know what he's done to it)
-90mm LS2 Throttle Body, polished like chrome & 12-point stainless ARP hardware to mount it
-Braided Stainless fuel lines and AN fittings
-Fuel Pump from MagnaCharger
-Air Intake Tube from MagnaCharger
-Gates 113.5 6-rib Belt
-Fuel Injector harness pigtails
-four 8-rib blower pulleys for those wanting to go 8-rib
I have roughly $6,000 into this thing...
This will ship exactly how Grip sent it to me, in heavy duty Magnacharger-style boxes with blown foam to secure the load. Grip took meticulous care of packing this thing, and I shall do the same!
Serious inquiries only please. $5,300.00 FIRM.




Last edited by SuperchargedSS; Apr 20, 2009 at 07:12 AM. Reason: removed the word "feeler"


