crower cam part number--00572 dur.217/226 on a 114 sep.and 553/575 lift with 1.7 rockers.with 1.8 rockers the lift goes to 585/608 cam only has 1000 miles on it.it was in a 408 that an old man had and it made crazy power.

250.00 shipped obo

l92 heads with springs good for 650 lift and some port work done on the exh. side titanium retainers and keeppers

1000 shipped obo

the cam was cut for these heads

i also have a 6.2 (6.0 bored 60ths.) has diamond flat top piston all new bearings,rings blanced ls2 rod and crank with arp rod bolts.the block was check with ut machine to check wall thickness and it is good for another 60ths. rings are gapped to spray it and was build professionally.

2000. obo i will work with buyer on shipping

http://img136.imageshack.us/my.php?i...sc02458ie6.jpg

http://img523.imageshack.us/my.php?i...sc02460fb4.jpg

l76 intake with brand new 42lbs. injectoer and aeromotive fuel rails and nitizal nozzles for nitrous has a 90mm comtech throttle body.I also have the truck style intake that this will all fit on.

1000 shipped obo

 

t t t

 

What is the compression of the block with the heads??

How much for a combo buy of it all???? What else would be needed to complete? besides gaskets, and accessories

 

pm replied

 

i also have a 6.2 (6.0 bored 60ths.) has diamond flat top piston all new bearings,rings blanced ls2 rod and crank with arp rod bolts.the block was check with ut machine to check wall thickness and it is good for another 60ths. rings are gapped to spray it and was build professionally.



send me all info on this block please sir!!

 

that is all info execpt it has never been in a truck yet

 

t t t