I've got a lot of parts lying around. Putting up some of the smaller stuff that I can ship easily. All prices include ship continental US. I'll post up pics if requested. All parts from my 03 Silvy.


02 Tac Module and Speartech harness for 90 mm TB - $120
Dark Gray steering wheel with radio/message controls -$120
Radix J-tube for 78mm TB - $120

I also have these parts that I will not ship. Anybody local or willing to drive. Would consider meeting someone within 70-80 miles with gas money added.

Front Diff . Approx 50K miles, 3.73 gearing - $500
5.3 Engine - Longblock + complete intake and TB. One head unbolted. About 48K miles - $400
6.0 intake complete with TB, fuel, sensors, injectors etc... - $50
Front Calipers, Rotors, Pads - about 40K on rotors and pads - $100
Rear Calipers, Rotors, Pads - about 40K on rotors and pads - $100
16" Tires and wheels - $200
2 magnaflow stainless bullet mufflers - $75
2 stock torque converters - $75 each
front lower control arms - $40
5.3 exhaust manifolds - $40
5.3 factory y-pipe with cats, approx 40k miles - $150
5.3 factory cat back - $200

 

TTT added pic of the injectors I already had online

 

TTT added more parts.

 

TTT - need some mod money Hotchkis sway bars on the list

 

what year is the 5.3l out of

 

Its the original engine out of my 03. I pulled it with a noise. Turned out to be a bad cam lobe. It now has a 6.0L cam and 2 new used lifters in it. One was galled (the noise) and the other I sent back with the cam. Needs a new head gasket, head bolts to get the one head back on. Only 48K miles on it. If my 6.0l were to break I wouldn't hesitate to slap it back together and flog it. I'll post up pictures of anything you'd like to see on it. Short of tearing oil pan and such off of it.

I'm not going to ship it. Hope thats clear in the listing. Hoping to sell it to someone local.

 

Is the 6.0 intake a LQ9 ?

 

specs on the magnaflow stainless mufflers. thanks

cory

 

No. From an LQ4. No difference in them as far as I know. From an 03. Return style fuel system.

 

Magnaflow 14416. Here is a link to some. The inlet and outlet pipe are shorter than in the picture now but still enough to weld to.

http://www.magnaflowexhausts.com/pro...productid=6012