magnuson mp112 supercharger to fit ls motors
#1
magnuson mp112 supercharger to fit ls motors
Magnuson mp112 super charger with stiegmeire port work for sale. came off a 05 Cadillac cts-v. i had a new transfer shaft spun and billet spacer made to fit the front drive assembly of my tahoe 5.3. i purchased all parts needed to install that normally don't come with a used item like the fuel manifold , balance tube that goes under the intake and connects the head. new inter-cooler rad and pump . all brackets to mount reservoir and pump. new bearings for the transfer shaft.
has 35 lb injectors
over $1000 of professional port work completed
cts-v throttle boddy
2 pully sizes
magnavolt system
fuel lines and hoses
belts.
with the new transfer shaft length and spacer i got made it should fit pretty much any setup with the cathedral port heads.
with port work and injectors this system was about 9k selling for $4750
email me if you need more pics willand@telus.net
Will.
has 35 lb injectors
over $1000 of professional port work completed
cts-v throttle boddy
2 pully sizes
magnavolt system
fuel lines and hoses
belts.
with the new transfer shaft length and spacer i got made it should fit pretty much any setup with the cathedral port heads.
with port work and injectors this system was about 9k selling for $4750
email me if you need more pics willand@telus.net
Will.
Last edited by albertasilverado; 03-13-2013 at 11:26 PM. Reason: pics
Thread
Thread Starter
Forum
Replies
Last Post