I have added pics to the add on ls1tech
PRC 6 Bolt LS3 260cc heads and Misc.. - LS1TECH

I am parting out my truck and moving on to something different. All parts below DO NOT include shipping. 100 miles on all engine parts Thanks

PRC LS3 260cc 6 bolt heads new in box .675 springs/solid stainless valves 68cc chamber
2000
427 rotating assembly total $1000 together or seperate prices below:
used wiseco pistons K397X125 w/upgraded pins and gfx rings
500
BME aluminum forging 500 aluminum rods, 2 passes
250
4" Dragon Slayer crank needs thrust repaired, already talked to shafteck and mile high cranks, its a 400 dollar repair
400
used HKE turbo cam specs: 235 239 .610 .610 117+2
250
used rollmaster double roller timing chain
75
Racepak UDX street dash w/BS3 interface module, 48" extension CAN cable, Program cable and disc
600

All used items have about 100 miles and 2 track passes on them. I will get pics up this afternoon.

Thanks
Jason

 

Where you living at now? Might be interested in the tranny

 

yes sir, I just went through it too and put a new jakes HD 34 sprag in it. Never run since then.

 

Block, lifter and balancer. I want to get but need part##, pics and phone #. Email jmark_byrd@msn.com

 

I will get you some pics when I get home. The block is a second gen block, the balancer is 917242, steel hub standard diameter w/a/c pulley. The lifters I will have to get the part number when I get home, I am pretty sure they are the HiPo lifters but I will make sure.

 

Is the damper for a truck and car???

 

car, f-body

 

Ok I will check my email tonight. If you need to call 478 747 8403 mark

 

Can you pm pics and specs on the heads and holley hi ram. I am somewhat local so I could take a roadtrip and pick up, if there are better than shipped prices.

 

pm's replied