Just built a stroker and I have an LQ9 crank in good condition for $100 (sold). Pistons and rods all good condition but one piston $60 (sold). Stock 317 heads in good condition complete $250. Comp 918's very low miles $100. All plus shipping. (All Sold)

 

interested in the heads, and maybe crank, got pictures?

 

Send me some pictures of the crank, rods, and pistons. Is there anything wrong with any of it besides the bad piston?

joshluther@myeastern.com

 

I'd be interested in the rotating stuff too. What cause the 'bad' piston failure?

 

I can get Pictures on Tuesday when I get to the shop. The crank is perfect. The rods are perfect and one piston has a cracked ring land. All of the others are in great shape. Oh, and the heads are complete and are also in great shape. This stuff came out of an Escalade and the truck ran good even with the cracked ring land.

 

Got them. I tried to get a close up of the cracked ring land but it was impossible. Too small.

 

More Pics

 

Some More

 

will this crank work with LQ4 rods and pistons? if so, I am very interested in it.

 

I believe the cranks are the same between the lq4 and lq9. I know the rods from the lq9 are stronger and the pistons are flat top. You can double check but I'm pretty sure they are the same.