KB Racing T6 Stainless Turbo Kit for Sale.
#1
TECH Apprentice
Thread Starter
iTrader: (1)
Join Date: Feb 2007
Location: Warrenton,Va
Posts: 361
Likes: 0
Received 0 Likes
on
0 Posts
KB Racing T6 Stainless Turbo Kit for Sale.
I'm selling my complete T6 turbo kit that I had Kyle (KB Racing) build me last year. I have not had a chance to install the kit and it has never been used and it is completely brand new! The kit does not come with fuel injectors, fuel pump, or a tune. This kit will fit a 1999-2007 Classic Chevrolet Silverado or GMC Sierra with either the 4.8, 5.3, or 6.0. It is meant to be used with all the factory options including the factory A/C. Additional photos available. I am located in Virginia and can ship. I'll list the details below: SOLD!!!
KB Racing Turbo Kit: (Both Hot & Cold sides are built completely of T304L Stainless Steel)
-Hot Side (Ceramic Coated Black)
-T6 Log Manifold
-3" Crossover Pipe
-4" Down-pipe
-All V-Band clamps provided.
-Cold Side (Powder Coated Black)
-3" Intercooler Piping
-4-core Aluminum Intercooler 12" Tall, 3" Thickness, & 20" Length.
-All clamps and couplings provided.
-Miscellaneous
- -4 Braided Turbo Feed Line
- -10 Hose Return Line with fittings for oil pan.
-Works Turbo Blanket in "Carbon Fiber" weave to fit a T6 Housing.
-50mm Blowoff Valve with extra spring and hardware.
-JGS Precision 50mm Wastegate
-Turbo
-Borg Warner S468 T6
-68mm Inducer
-83mm Exducer
-1.10 A/R Turbine Housing
-Turbine Housing is Ceramic Coated Black like the rest of the Hot Side.
-Has never been installed or run just taken apart to ceramic coat.
KB Racing Turbo Kit: (Both Hot & Cold sides are built completely of T304L Stainless Steel)
-Hot Side (Ceramic Coated Black)
-T6 Log Manifold
-3" Crossover Pipe
-4" Down-pipe
-All V-Band clamps provided.
-Cold Side (Powder Coated Black)
-3" Intercooler Piping
-4-core Aluminum Intercooler 12" Tall, 3" Thickness, & 20" Length.
-All clamps and couplings provided.
-Miscellaneous
- -4 Braided Turbo Feed Line
- -10 Hose Return Line with fittings for oil pan.
-Works Turbo Blanket in "Carbon Fiber" weave to fit a T6 Housing.
-50mm Blowoff Valve with extra spring and hardware.
-JGS Precision 50mm Wastegate
-Turbo
-Borg Warner S468 T6
-68mm Inducer
-83mm Exducer
-1.10 A/R Turbine Housing
-Turbine Housing is Ceramic Coated Black like the rest of the Hot Side.
-Has never been installed or run just taken apart to ceramic coat.
Last edited by Sierra1320; 07-13-2013 at 05:41 PM.
#6
TECH Apprentice
Thread Starter
iTrader: (1)
Join Date: Feb 2007
Location: Warrenton,Va
Posts: 361
Likes: 0
Received 0 Likes
on
0 Posts
Depending upon the cylinder heads, cam, and compression you could make anywhere from 500rwhp to well over 600rwhp. It all depends on the boost as well. The S468 turbo would be a little on the small side for a 6.0 but, it would have very little lag and would make for a nice DD setup since it has the 1.10 A/R compared to the 1.32 A/R on some of these turbos.