going out of business sale!!!!!
#1
going out of business sale!!!!!
well, not really. I'm demodding the truck back to fairly stock form, for several reasons. Buyer pays shipping on everything.
KBRacing Front mount turbo kit $4000 OBO
Comes with the following:
Precision 78mm T4 turbo. Polished cold side, ceramic .96 hot side
all 3" cold side with large A/A intercooler
log manifold with EGT probe hole
crossover pipe
TiAL 38mm Wastegate
TiAL 50mm Blow off valve
Turbosmart manual boost controller
3" downpipe with WBO2 Bung
Autometer Phantom series Boost/vac gague
Autometer Phantom series Pyrometer and probe/heatsink kit
Autometer steering Column pod
log and downpipe are wrapped
Billet oil feed block
braided -4 oil feed hose
manual analog oil pressure guage (inline at the turbo)
billet feed and drain blocks for turbo
braided -10 drain hose and fittings for the pan
misc vac reference hoses and lines to operate accessories of the kit
VERY complete kit minus fuel system and tuning, its ran well on just a 255 pump and some 60# injectors.
I'm also parting out the 347ci longblock
pending this weekend's teardown and inspection I'll have,
WCCH Stage 2 317 heads
Crane dual springs
74cc chambers
Ti retainers and locks ($900 OBO)
LS2 timing set ($75)
Lingenfelter GT 2-3 cam ($200)
Probe 6.125 H beam forged rods ($300)
ARP Cam bolts ($8 )
ARP rod bolts ($80)
Trans and converter:
4L80E Built by Noe's transmissions in Houston
Rossler valvebody
Rossler Ross-lock transbrake system
B&M deep pan
built for 1400+ hp with all the goodies
conversion fittings to run -6 cooler hose
Yank SC3000 10.5" converter (LS1 bolt pattern)
SFI conversion flexplate for LS1/80E
ARP converter bolts
Trans and converter $2800 Good way for someone needing to step up to a bigger trans for minimal $$$ output. If you have a 2000 truck, we can work something out on the crossmember as well. Or $700 for the converter and $2200 shipped for the trans... I know this converter may not be ideal for everyone interested.
-Hidden hitch for roll pan... this fit my old street scene pan, I'm guessing it will fit most others fine. $100 OBO
-Eagle 16x10's (6 lug) with Hoosier 28x10x16's mounted, have about 12 passes on them $400
There will be more stuff added and edited as I go.
Things I'm looking for and would consider for trade / partial trade, and I'll entertain reasonable offers on this stuff...
-Coated Long tube headers and Y pipe
-LOW MILE 5.3/6L longblock
-built 4L60E/converter (plus cash trade for the 80E setup)
-Thanks for looking guys
KBRacing Front mount turbo kit $4000 OBO
Comes with the following:
Precision 78mm T4 turbo. Polished cold side, ceramic .96 hot side
all 3" cold side with large A/A intercooler
log manifold with EGT probe hole
crossover pipe
TiAL 38mm Wastegate
TiAL 50mm Blow off valve
Turbosmart manual boost controller
3" downpipe with WBO2 Bung
Autometer Phantom series Boost/vac gague
Autometer Phantom series Pyrometer and probe/heatsink kit
Autometer steering Column pod
log and downpipe are wrapped
Billet oil feed block
braided -4 oil feed hose
manual analog oil pressure guage (inline at the turbo)
billet feed and drain blocks for turbo
braided -10 drain hose and fittings for the pan
misc vac reference hoses and lines to operate accessories of the kit
VERY complete kit minus fuel system and tuning, its ran well on just a 255 pump and some 60# injectors.
I'm also parting out the 347ci longblock
pending this weekend's teardown and inspection I'll have,
WCCH Stage 2 317 heads
Crane dual springs
74cc chambers
Ti retainers and locks ($900 OBO)
LS2 timing set ($75)
Lingenfelter GT 2-3 cam ($200)
Probe 6.125 H beam forged rods ($300)
ARP Cam bolts ($8 )
ARP rod bolts ($80)
Trans and converter:
4L80E Built by Noe's transmissions in Houston
Rossler valvebody
Rossler Ross-lock transbrake system
B&M deep pan
built for 1400+ hp with all the goodies
conversion fittings to run -6 cooler hose
Yank SC3000 10.5" converter (LS1 bolt pattern)
SFI conversion flexplate for LS1/80E
ARP converter bolts
Trans and converter $2800 Good way for someone needing to step up to a bigger trans for minimal $$$ output. If you have a 2000 truck, we can work something out on the crossmember as well. Or $700 for the converter and $2200 shipped for the trans... I know this converter may not be ideal for everyone interested.
-Hidden hitch for roll pan... this fit my old street scene pan, I'm guessing it will fit most others fine. $100 OBO
-Eagle 16x10's (6 lug) with Hoosier 28x10x16's mounted, have about 12 passes on them $400
There will be more stuff added and edited as I go.
Things I'm looking for and would consider for trade / partial trade, and I'll entertain reasonable offers on this stuff...
-Coated Long tube headers and Y pipe
-LOW MILE 5.3/6L longblock
-built 4L60E/converter (plus cash trade for the 80E setup)
-Thanks for looking guys
Last edited by silver-mod-o; 01-12-2010 at 11:11 AM.