going out of business sale!!!!!
well, not really. :jest: I'm demodding the truck back to fairly stock form, for several reasons. Buyer pays shipping on everything.
KBRacing Front mount turbo kit $4000 OBO Comes with the following: Precision 78mm T4 turbo. Polished cold side, ceramic .96 hot side all 3" cold side with large A/A intercooler log manifold with EGT probe hole crossover pipe TiAL 38mm Wastegate TiAL 50mm Blow off valve Turbosmart manual boost controller 3" downpipe with WBO2 Bung Autometer Phantom series Boost/vac gague Autometer Phantom series Pyrometer and probe/heatsink kit Autometer steering Column pod log and downpipe are wrapped Billet oil feed block braided -4 oil feed hose manual analog oil pressure guage (inline at the turbo) billet feed and drain blocks for turbo braided -10 drain hose and fittings for the pan misc vac reference hoses and lines to operate accessories of the kit VERY complete kit minus fuel system and tuning, its ran well on just a 255 pump and some 60# injectors. I'm also parting out the 347ci longblock pending this weekend's teardown and inspection I'll have, WCCH Stage 2 317 heads Crane dual springs 74cc chambers Ti retainers and locks ($900 OBO) http://i26.photobucket.com/albums/c1...mod-o/wcch.jpg http://i26.photobucket.com/albums/c1...od-o/wcch2.jpg http://i26.photobucket.com/albums/c1...er-mod-o/3.jpg http://i26.photobucket.com/albums/c1...od-o/wcch4.jpg http://i26.photobucket.com/albums/c1...od-o/wcch5.jpg http://i26.photobucket.com/albums/c1...od-o/wcch6.jpg LS2 timing set ($75) Lingenfelter GT 2-3 cam ($200) Probe 6.125 H beam forged rods ($300) ARP Cam bolts ($8 ) :P ARP rod bolts ($80) Trans and converter: 4L80E Built by Noe's transmissions in Houston Rossler valvebody Rossler Ross-lock transbrake system B&M deep pan built for 1400+ hp with all the goodies conversion fittings to run -6 cooler hose Yank SC3000 10.5" converter (LS1 bolt pattern) SFI conversion flexplate for LS1/80E ARP converter bolts Trans and converter $2800 Good way for someone needing to step up to a bigger trans for minimal $$$ output. If you have a 2000 truck, we can work something out on the crossmember as well. Or $700 for the converter and $2200 shipped for the trans... I know this converter may not be ideal for everyone interested. -Hidden hitch for roll pan... this fit my old street scene pan, I'm guessing it will fit most others fine. $100 OBO -Eagle 16x10's (6 lug) with Hoosier 28x10x16's mounted, have about 12 passes on them $400 There will be more stuff added and edited as I go. Things I'm looking for and would consider for trade / partial trade, and I'll entertain reasonable offers on this stuff... -Coated Long tube headers and Y pipe -LOW MILE 5.3/6L longblock -built 4L60E/converter (plus cash trade for the 80E setup) -Thanks for looking guys :) |
pm sent, i want the heads.
-Nate |
pm sent
|
I will PM you later.Got some pacesetter coated headers + Y.Also low mi. Circle D,PB-2 4l60e I am thinking of parting with.
|
Originally Posted by nlawson6.0
(Post 4366812)
pm sent, i want the heads.
-Nate |
PM sent on GT2-3 cam
|
Originally Posted by SincalT/A
(Post 4366830)
I will PM you later.Got some pacesetter coated headers + Y.Also low mi. Circle D,PB-2 4l60e I am thinking of parting with.
Originally Posted by Mangled03gmc
(Post 4366835)
FAWK :bang:
|
i might be interested in the rod bolts. will you have lifters and an oil pump for sale too?
|
Do you have a 99-00 style crossmember(the one that sits flush with the frame)? If so, let me know if you'd be willing to part with it. I'd love to buy the whole 4l80e setup from you, I just don't have the funds right now.
|
Ill take the head studs if they're for the pre 04 blocks
|
All times are GMT -5. The time now is 08:31 PM. |
© 2024 MH Sub I, LLC dba Internet Brands