Garage Clean Out - Lots of Things!
#1
Garage Clean Out - Lots of Things!
Selling a bunch of random parts that are in my garage.
Send me a PM with any questions.
Send me a PM with any questions.
- Pure Choice transmission fittings: Brand new. These adapt the stock GM transmission fitting to 6AN. $20 shipped
- Belltech shock extension kit: Brand new, part number 6654. SOLD
- Motorcraft PCV valve: Brand new, part number EV127A, this is common for forced induction because it works well as a check valve also. SOLD
- Stock 706 heads: Used, come assembled as shown, no issues, removed to put on aftermarket heads. Will ship to a head porter if you want. $150 shipped (heavy!)
- 799 valve springs: New take-offs, springs only, full set. I don't think these are anything special, they have faint pink stripe on the sides. SOLD
- LS7 lifters: Used about 1000 miles. SOLD
- Stock exhaust valves: I have six 1.59" and two 1.55". I believe they were all new and came in a new set of heads. I have put about 500 miles on them. $Make offer.
- Vacuum block. Used, good condition but polished finished is a little scuffed up. Three 1/8NPT pressure ports. 3/8” line to vacuum source. $20 shipped
- -10AN 45deg hose end: New, not sure what brand. Has a brass ferrule. $8 shipped
- Turbo oil feed and drain flanges: All new for T4/T3 turbo
Feed: -4AN with 0.04” restrictor built in w/ gasket SOLD
Feed: 1/8” NPT female. $Make offer
Drain: Oil drain is for 5/8” ID hose with gasket. $Make offer - Silicone couplers: All new. 4”x4” 90deg, 4”x4” straight, 3”x3” straight, 4”x3.75” straight. $Make offer
- Stainless t-bolt clamps: All new. I believe the sizes I have are 4”, 3.75” and 3.5”. SOLD
- 4L80E Transgo HD-2 parts: New. Few leftover parts if anyone wants them. 3-piece separator plate for dual feed, pressure relief valve, boost valve, gaskets, pan gasket (not pictured), $Make offer
- Random 4L80E parts: All used from 99 unit that was in perfect condition. Input shaft, forward clutch hub, main shaft, bolt-on yoke output shaft, clutch steels and frictions. $Make offer
- Belltech 1* pinion angle shims: New, 2.5" wide. SOLD
- Pro Comp 2* pinion angle shims: Used, 1.75" wide. SOLD
- LED 3rd brake light: New from eBay, it's the one in the pics with the tinted center and clear cargo lights. I tested it and it works great. $30 shipped
- Stock brake caliper brackets: Used, in good condition. Replaced with Baer front brakes and SUV rear brakes. $Make offer
- Fuel pump: New, came with a new fuel bucket but I swapped to a Walbro 400. Unknown brand, no markings on it. It's not a Walbro or OEM brand. $20 shipped
Last edited by Ferocity02; 03-08-2015 at 11:33 PM.
#6
On The Tree
iTrader: (10)
I'll take the following please.
3.Motorcraft PCV valve: Brand new, part number EV127A, this is common for forced induction because it works well as a check valve also. $9 shipped
12.Stainless t-bolt clamps: All new. I believe the sizes I have are 4”, 3.75” and 3.5”. $Make offer
15.Belltech 1* pinion angle shims: New, 2.5" wide. $15 shipped
16.Pro Comp 2* pinion angle shims: Used, 1.75" wide. $10 shipped
Please send total and paypal info. Thanks.
3.Motorcraft PCV valve: Brand new, part number EV127A, this is common for forced induction because it works well as a check valve also. $9 shipped
12.Stainless t-bolt clamps: All new. I believe the sizes I have are 4”, 3.75” and 3.5”. $Make offer
15.Belltech 1* pinion angle shims: New, 2.5" wide. $15 shipped
16.Pro Comp 2* pinion angle shims: Used, 1.75" wide. $10 shipped
Please send total and paypal info. Thanks.
Thread
Thread Starter
Forum
Replies
Last Post
Raggedz71
TOWING & OFFROAD PERFORMANCE
3
07-29-2016 10:20 AM