NipRing

iTrader: (2)

Bumping this.

NipRing

iTrader: (2)

Still available. I'd appreciate it if the guys who have already bought could put up some pics.

ronnyg

iTrader: (1)

ever get to install this kit on the GMT900 trucks? curious on fitment

NipRing

iTrader: (2)

I emailed the Stoptech tech support but I haven't heard back from them. I've heard they fit the 900 series but I cannot confirm that.

BigKID

iTrader: (5)

I have taken an interest in this so I did a little research on the cross platform fitment. According to StopTech's cutsheets, there is a minor difference in the GMT800 and GMT900 kits. It seems they use a 3.03mm shallower rotor hat for the GMT900. This will move the rotor and caliper out towards the wheel. So putting a GMT800 kit on a GMT900 may have the same effect as the lowered spindle issue mentioned above.

GMT800 template - http://www.stoptech.com/docs/wheel-f...182-2680-01_FP

GMT900 template - http://www.stoptech.com/docs/wheel-f...188-26D0-01_FP

Jonesmechanical

are these still available. I'm building a 2000 1/2 ton 4x4 truck. Feel free to call/text me at 8013108170. Greg.

NipRing

iTrader: (2)

I have one full black front and rear kit and 10 red front and rear kits left. When they're gone, they're gone...