FS: Moog replacement lower control arms
Mar 2, 2016 | 11:38 PM
#1
FS: Moog replacement lower control arms
These fit all GMT800 1/2 ton. I bought these 6 months ago when I rebuilt my front end, I trimmed the balljoints for the Belltech spindles to clear 17" wheels. Balljoints and bushings are still perfect, but the balljoints can only be used with lowering spindles. I had to reinstall my original arms when I swapped back to the stock spindles and I plan to put new balljoints in my stock arms. $100 shipped
Mar 3, 2016 | 02:58 PM
#2
Teching In
Joined: Feb 2014
Posts: 0
Likes: 0
control arms
These fit all GMT800 1/2 ton. I bought these 6 months ago when I rebuilt my front end, I trimmed the balljoints for the Belltech spindles to clear 17" wheels. Balljoints and bushings are still perfect, but the balljoints can only be used with lowering spindles. I had to reinstall my original arms when I swapped back to the stock spindles and I plan to put new balljoints in my stock arms. $100 shipped
Thread
Thread Starter
Forum
Replies
Last Post
