For sale is a full set (8 injectors) of GM Flex Fuel E85 injectors taken out of a 2005 Chevrolet Avalanche. The injectors have approximately 1500 miles on them.

AC Delco Part number 217-1626

GM Part Number 12580426

$100 obo
Looking to sell fast, so make an offer.

These injectors will work with 4.8, 5.3, and 6.0 GM LS based motors with proper wiring harness and tuning. They are a good upgrade over stock injectors if you need some extra fuel going to the motor after a head or cam swap.

Image shown isn't the actual injectors for sale. Will have new image posted soon. Have any questions? Please feel free to PM or email me.
These injectors are in good working condition and are ready to ship.

Thanks,

Jake

GM Flex Fuel Injector 4.8 5.3 6.0 AC Delco 217-1626

 

Do you know if they are a direct fit for a 2000 6.0L. What is the flow rate?

 

They aren't a direct fit, they require pigtail adapters. I'm pretty sure they're 33'ish lb. injectors but can't remember exactly. I've got bigger plans for my truck so I need much larger injectors.

 

if i could find out what adapter you need i'd prolly take em...i've been looking to see if anyone makes adapters for em.

anyone adapted these injectors before?

 

I believe it's a pigtail from AC Delco. Here's the p/n PT1672

I need to get rid of these, someone offer me something.

 

I found an injector pigtail made by FAST that's about 7 bux a piece, here's the link:

http://www.fuelairspark.com/WhatsNew...nectorkits.pdf

You would need the EV6 to EV1 adapter. EV6 (UScar) on the injector end, and EV1 (minitimer) on the harness end.

 

The injectors are 38lbs at regular fuel psi

 

Thanks, I couldn't find the flow rating for the life of me. I knew that I had it bookmarked somewhere, but I'm on the laptop at school haha.

 

injectors are 33 lbs, not 38.

 

They start at 35.4lb @ 0 kpa, all the way to 38.4 @ 80 kpa.
At 60 KPA they are 37.95
I am reading this off an 06 flex fuel stock tune read.