ditching my ported fast 90mm intake with nick williams throttle body. to make it a full package, i will also include my L92 water pump, and have the stuff to relocate the pulley. i will trade my modified alternator bracket for your stock bracket off of your truck. can also include some 36 lb injectors.

850 shipped on intake/throttle body
$60 for water pump
100 for injectors
$50 for return style fuel rail (car style)

OBO

the only other thing needed for the swap is the injector pigtails. they are about $20 from summit.

 

Lmk if u wanna part out the tb from intake... Bump.....

 

Tb is drive by cable right?

 

yes it is a cable throttle body.

things to know...had to get rid of the EVAP nipple to convert it to work with truck accessories. evap is dumb emmission crap anyways lol. i had to drill the hole in the throttle body bigger because the MAP sensor couldnt supply my 408 with enough air at idle. it can easily be filled and redrilled back to factory. there is a dab of JB weld on the bottom side. there was a spot that looked like it may have been a hairline crack. the intake didnt leak at all, and it may not have been a crack at all but to cover my bases i dropped a dab of JB on the spot for the hell of it. ive been running it this way for years with no issues. ford red top injectors flow ~36 lbs at 58psi fuel pressure.

 

Sold.