----ITEMS SOLD----
hey guys, just posting some more things that I have gathered while cleaning out my "personal" project bay at my shop! today its two nitrous throttle plates, both very little use, both made by Holley's NOS. These were both used briefly on my personal SSS truck, first the 78mm (before the 4 bolt days!) followed by the LS2 / 90mm plate once the x-link came out. Since then, its just been direct port custom kits on roots blowers (im kinda a p#ssy though, dont shoot much spray in there LOL).

SO first one, is going to be the NOS 90mm 4 bolt LS plate from NOS p/n: 13435NOS, which is at $287.95 right now on Holley's site, and appears the same on Summit. The plate comes with what you see in the photos, but I do have MANY -4 lines laying around, most likely some of the exact ones from the kit that were never, or barely, used. If you want the little 18" -4AN female to -3AN female -4 hoses that hook to the plate, I can throw a set in for ya. Also, if your curious, the plate is exactly .5" thick. The paper gasket needed to seal the throttle to the plate will also be included, a new one of course (or you can use silicone, up to you!). Some jets are included with each plate too, which I will list here: .020, .023, .026, .028, .031, .032, .035, 044, .051, .055, .063. There are quite a few extra jets thrown in for ya; the kit came with .031, .035, .044, .051, .055, .063 (respectively NOS rated these jets for 100HP, 125HP and 150HP fuel+N2O). The kit CAN spray more power, properly yes, then 150hp. I have heard crazy numbers claimed by people using this plate, but 200hp is the max it really should be "aimed" to be used for. (Also you'd need to pick up a few jets to go from the 150 to 200 HP, and have enough fuel system to back that up of course). Proper length hardware is included (ignore the hex head SS hardware in the picture, my assistant accidentally used the 78mm plate kit's hardware in the 90mm plate kit photo- I have stainless allen head proper length hardware for this plate, included). Please feel free to ask any questions. ----SOLD----





Lastly, we have the 3 bolt 78mm throttle plate for the Gen3 cable/DBW 3 bolt stuff. This kit was also installed on my personal SSS truck, WAY back when it was N/A and had a stock manifold on it. It was prob on the truck for maybe 1 year or so, not used much only at the strip. It has very very minor cosmetic blemishes in the anodizing as you can see in the pictures, if you look really hard. This plate was part of NOS kit number 13434NOS, and comes with what you see in the picture- AS WELL as (2x) -4AN female to -3AN female 18" -4 hoses (which connect to the plate, usually from your solenoids), a new paper gasket needed to seal the throttle to the plate (OEM rubber seal in manifold seals other side), AND the following jets: .031, .035, .038, .051, .055, .063. These are the jets that come with the kit, and respectively are 100hp, 125hp, and 150hp jet set ups (Fuel and N2O jets) and the kit can make up to 200hp safely (using larger jets and adequate fueling from the vehicle). The 3x stainless hex head 10mm bolts are included, as they are needed for the additional .5" thickness added behind the throttle plate. Basically, this is a complete TB plate kit, minus a few tiny items (such as a throttle cable extension bracket- for DBC trucks/older F-Body). BUT these kits come with something extra- LOVE from their prior experiences!! (and great prices lol!) ---SOLD---. PLEASE feel free to PM me with ANY questions and/or reasonable offers!

 

90mm plate is SOLD! Thank you!

- John

 

Payment sent 4 78mm kit

 

Okay both plates SOLD! Thank you guys for quick and easy transactions.

- John

 

John if kit has shipped please send tracking info